NL6448AC33-18 NEC, NL6448AC33-18 Datasheet - Page 18

• Manufacturer Part Number: NL6448AC33-18
• Description: 26 cm 10.4 inches / 640 x 480 pixels / 262144 colors / Luminance adjustable / Non anti-glare panel
• Manufacturer: NEC

GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
18
Next figures and sentence are very important, please understand these contents as follows.
<1>
<2>
<3>
<4>
<1>
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
CAUTION
CAUTION
Pick the pouch only, when taking out the module from a carrier box.
As the electrostatic discharges may break the LCD module, handle the LCD module with care against
electrostatic discharges.
As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
cleaning.
Do not pull the interface connectors in or out while the LCD module is operating.
Put the module display side down on a flat horizontal plane.
Handle connectors and cables with care.
When the module is operating, do not lose CLK, Hsync, or Vsync signal. If any one of these signals is
lost, the LCD panel would be damaged.
The torque for mounting screw should never exceed 0.294 N·m (3 kgf·cm).
Dew drop atmosphere should be avoided.
Do not store and/or operate the LCD module in high temperature and/or high humidity atmosphere.
Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere
is recommended.
This module uses cold cathod fluorescent lamps. Therefore, the life time of lamp becomes short
conspicuously at low temperature.
Do not operate the LCD module in high magnetic field.
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate
Do not touch an inverter ···on which is stuck a caution label··· while the LCD module is under the operation,
because of dangerous high voltage.
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when you make
a mistake to operate.
Data Sheet EN0497EJ1V0DS00
NL6448AC33-18A