NL10276ac30_03l NEC, NL10276ac30_03l Datasheet - Page 40

• Manufacturer Part Number: NL10276ac30_03l
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

GENERAL CAUTIONS
completely.
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions regarding atmosphere
(4) Cautions about the module characteristics
40
Because the following figures and statements are very important, please be sure you understand their contents
Pick up the pouch only, when removing the module from a carrier box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a flat horizontal plane.
f)
g)ý The torque to mounting screw should never exceed 0.392 N·m (4 kgf·cm).
h)ý Do not give the stress to interface connectors. The module may become function deficiency by a contact
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in a high-temperature and/or high-humidity atmosphere.
c) This module uses cold cathode fluorescent lamps. The life time of the lamps is shortened conspicuously at
d) Do not operate the LCD module in high magnetic field.
a) Do not apply a fixed pattern data signals to theLCD module at product aging. Applying a fixed pattern for a
Do not touch an inverter on which there is a caution label while the LCD module is in operation, because of
dangerous high voltage.
CAUTION
electrostaic discharges.
cleaning.
Handle connectors and cables with care.
Storage in an electro-conductive polymer packing pouch and in a relatively low-temperature atmosphere is
recommended.
low temperatures.
long time may cause image sticking.
defective and damages. Pay attention to handling at the time of matching connector connection and in the
connection condition.
CAUTION
This figure is a warning that you will get an electric shock if you make a mistake in operation.
This figure is a warning that you will get hurt if you make a mistake in operation.
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a warning that you will get hurt and/or the module will be damaged if
you make a mistake in operation.
Data Sheet EN0512EJ1V0DS00
NL10276AC30-03L