NL10276BC30-10 NEC, NL10276BC30-10 Datasheet - Page 24

• Manufacturer Part Number: NL10276BC30-10
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
understanding this contents!
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS", after
The product must be installed using mounting holes without undue stress such as bends or twist
(See outline drawings). And do not add undue stress to any portion (such as bezel flat area) except
mounting hole portion.
Bends or twist described above and undue stress to any portion except mounting hole portion may
Corporation recommends using the cloth with ethanolic liquid such as screen cleaner for LCD.
modules) from inner packing box. If customer touches it, products may be broken down or out of
adjustment, because of stress to mounting parts.
turns down.
customer deals with the product, because products may be damaged by electrostatic.
distortion of the bezel.
cause display un-uniformity.
sequence may break down the product.
may not light. Operation abnormality of the high-voltage circuit may occur by breaking.
Do not hook cables nor pull connection cables such as flexible cable and so on, for fear of damage.
The torque for mounting screws must never exceed 0.34N m. Higher torque values might result in
Take hold of both ends without touch the circuit board when customer pulls out products (LCD
If customer puts down the product temporarily, the product puts on flat subsoil as a display side
Do not press or rub on the sensitive display surface. If customer clean on the panel surface, NEC
Do not bend lamp cables from the foundation of the lamp holder, cables may break and the lamp
Take the measures of electrostatic discharge such as earth band, ionic shower and so on, when
Do not push-pull the interface connectors while the product is working, because wrong power
breaking, because they are made of glass. (Shock: To be not greater 294m/s
not greater 11ms, Pressure: To be not greater 19.6N)
shock.
Pay attention to burn injury for the working IC!
Do not shock and press the LCD panel and the backlight lamp! There is a danger of
Do not touch the lamp cables while turn on. Customer will be in danger of an electric
wrong operations.
wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
This sign has the meaning that customer will get an electrical shock, if customer has
PRELIMINARY DATA SHEET DOD-M-1297 (4th edition)
NL10276BC30-10
2
and to be
24
4
4