NL128102BC23_03 NEC, NL128102BC23_03 Datasheet - Page 22

• Manufacturer Part Number: NL128102BC23_03
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

(2) Environment
(3) Specification for products
(4) Other
General specifications for the LCD
} Do not push-pull the interface connectors while turn on, because wrong power sequence may break
~ Connection cables such as flexible cable, and so on, are danger of damage. Do not hook cables nor
x Dewdrop atmosphere must be avoided.
y Do not operate and/or store in high temperature and/or high humidity atmosphere. If customer store
z Do not operate in high magnetic field. Circuit boards may be broken down by it.
{ Use an original protection sheet on product surface (polarizer). Adhesive type protection sheet
x Do not display the fixed pattern for a long time because it may cause image sticking. If the fixed
y The product may be changed of color by viewing angle because of the use of condenser sheet for
z The product may be changed of luminance by voltage variation, even if power source applies
{ Optical characteristics may be changed by input signal timings.
x All GND, GNDB and VDD terminals should be connected without a non-connected signal line.
y Do not disassemble a product and/or adjust volume.
z If customer would like to replace backlight lamps, see 'REPLACEMENT MANUAL FOR
{ If customer uses screwnails, pay attention not to insert waste materials in inside of products.
| When customer returns product for repair and so on, pack it with original shipping package
}Not only the module but also the equipment that used the module should be packed and transported
The following items are neither defects nor failures.
∗ ∗ ∗ ∗ Response time, luminance and color gamut may be changed by ambient temperature.
∗ ∗ ∗ ∗ The LCD may be seemed luminance uniformity, flicker, vertical seam and/or small spot by
∗ ∗ ∗ ∗ Optical characteristics (e.g. luminance, display uniformity, etc.) gradually is going to
display patterns.
change depending on operating time, and especially low temperature, because the LCD has
cold cathode fluorescent lamps.
as the module becomes vertical.Otherwise, there is the fear that a display dignity decreases by an
impact or vibrations."
down the product.
pull them.
the product, keep in antistatic pouch in room temperature, because of avoidance for dusts and
sunlight.
should be avoided, because it may change color and/or properties of the polarizer.
pattern is displayed on the screen, use a screen saver.
backlight unit.
recommended voltage to backlight inverter.
BACKLIGHT'.
because of avoidance of some damages during transportation.
DOD - M – 0379
NEC Corporation
22
/
25