NL12876BC26_21 NEC, NL12876BC26_21 Datasheet - Page 23

• Manufacturer Part Number: NL12876BC26_21
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

(2) Environment
(3) Specification for products
(4) Installation of an inverter
} Do not push-pull the interface connectors while turn on, because wrong power sequence may break
~ Connection cables such as flexible cable, and so on, are danger of damage. Do not hook cables nor
x Dewdrop atmosphere must be avoided.
y Do not operate and/or store in high temperature and/or high humidity atmosphere. If customer store
z Do not operate in high magnetic field. Circuit boards may be broken down by it.
{ Use an original protection sheet on product surface (polarizer). Adhesive type protection sheet
x Do not display the fixed pattern for a long time because it may cause image sticking. If the screen is
y The product may be changed of color by viewing angle.
z Luminance may have change by voltage variation, even if power source applies recommended
{ Optical characteristics may be changed by input signal timings.
x Insert an insulation sheet between the inverter and the chassis, when the inverter is installed on the
down the product.
pull them.
the product, keep in antistatic pouch in room temperature, because of avoidance for dusts and
sunlight.
should be avoided, because it may change color and/or properties of the polarizer.
displayed the fixed pattern, use a screen saver.
voltage to backlight inverter.
chassis. If customer does not insert the insulation sheet, electric discharge may occur from the inverter
to the module.
Recommended insulation sheet:
• Thickness of the insulation sheet:t 0.4mm
• Material:
Polyethylene terephtalate (UL class : 94V-0)
DOD-M-0362
NEC Corporation
23
/
27