NL160120AC27_22B NEC, NL160120AC27_22B Datasheet - Page 33

• Manufacturer Part Number: NL160120AC27_22B
• Description: Display Module
• Manufacturer: NEC

www.DataSheet.co.kr
① Take hold of both ends without touching the circuit board when the product (LCD module) is picked up
② Do not hook nor pull cables such as lamp cable, and so on, in order to avoid any damage.
③ When the product is put on the table temporarily, display surface must be placed downward.
④ When handling the product, take the measures of electrostatic discharge with such as earth band, ionic
⑤ The torque for product mounting screws must never exceed 0.735 N⋅m. Higher torque might result in
6. PRECAUTIONS
from inner packing box to avoid broken down or misadjustment, because of stress to mounting parts on the
circuit board.
shower and so on, because the product may be damaged by electrostatic.
distortion of the bezel. And the length of product mounting screws must be ≤ 4.7mm.
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
"6.3 ATTENTIONS", after understanding these contents!
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
∗ Do not touch the working backlight. There is a danger of an electric shock.
∗ Do not touch the working backlight . There is a danger of burn injury.
∗ Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
!
because they are made of glass. (Shock: To be not greater 294m/s
11ms, Pressure: To be not greater 19.6N (φ16mm jig))
wrong operations.
wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
sustain a damage, if customer has wrong operations.
This sign has the meaning that customer will get an electrical shock, if customer has
This sign has the meaning that customer will be injured by himself or the product will
!
PRELIMINARY DATA SHEET DOD-PP-0619 (1st edition)
NL160120AC27-22B
2
and to be not greater
33
Datasheet pdf - http://www.DataSheet4U.net/