NL160120BC27_02 NEC, NL160120BC27_02 Datasheet - Page 24

• Manufacturer Part Number: NL160120BC27_02
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
"6.3 ATTENTIONS", after understanding this contents!
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
Take hold of both ends without touch the circuit board cover when customer pulls out products
(LCD modules) from inner packing box. If customer touches it, products may be broken down or
out of adjustment, because of stress to mounting parts.
Do not hook cables nor pull connection cables such as lamp cable and so on, for fear of damage.
If customer puts down the product temporarily, the product puts on flat subsoil as a display side
turns down.
Take the measures of electrostatic discharge such as earth band, ionic shower and so on, when
customer deals with the product, because products may be damaged by electrostatic.
The torque for mounting screws must never exceed TBD N m. Higher torque values might result in
distortion of the bezel.
The product must be installed using mounting holes without undue stress such as bends or twist
(See outline drawings). And do not add undue stress to any portion (such as bezel flat area) except
mounting hole portion.
Bends or twist described above and undue stress to any portion except mounting hole portion may
cause display un-uniformity.
Do not press or rub on the sensitive display surface. If customer clean on the panel surface, NEC
Corporation recommends using the cloth with ethanolic liquid such as screen cleaner for LCD.
Do not push-pull the interface connectors while the product is working, because wrong power
sequence may break down the product.
!
because they are made of glass. (Shock: To be not greater 294m/s
11ms, Pressure: To be not greater 19.6N)
danger of an electric shock.
Do not touch the working backlight and IC. Customer will be in danger of burn injury.
Do not touch HIGH VOLTAGE PART of the inverter while turn on. Customer will be in
Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
wrong operations.
wrong operations.
sustain a damage, if customer has wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
This sign has the meaning that customer will get an electrical shock, if customer has
This sign has the meaning that customer will be injured by himself or the product will
!
PRELIMINARY DATA SHEET DOD-M-1313 (1st edition)
2
and to be not greater
NL160120BC27-02
24