upd78f0148m1gka1-9eu Renesas Electronics Corporation., upd78f0148m1gka1-9eu Datasheet - Page 191

no-image

upd78f0148m1gka1-9eu

Manufacturer Part Number
upd78f0148m1gka1-9eu
Description
8-bit Single-chip Microcontrollers
Manufacturer
Renesas Electronics Corporation.
Datasheet
7.4.5
bit timer capture/compare register 00n (CR00n).
bit 0 (TOE0n) and bit 1 (TOC0n1) of 16-bit timer output control register 0n (TOC0n) to 1. This enables a square wave
with any selected frequency to be output.
The basic operation setting procedure is as follows.
<1> Set the count clock by using the PRM0n register.
<2> Set the CRC0n register (see Figure 7-34 for the set value).
<3> Set the TOC0n register (see Figure 7-34 for the set value).
<4> Set any value to the CR00n register (0000H cannot be set).
<5> Set the TMC0n register to start the operation (see Figure 7-34 for the set value).
Caution Do not rewrite CR00n during TM0n operation.
Remarks 1. For the setting of the TO0n pin, see 7.3 (5) Port mode register 0 (PM0).
A square wave with any selected frequency can be output at intervals determined by the count value preset to 16-
The TO0n pin output status is reversed at intervals determined by the count value preset to CR00n + 1 by setting
TMC0n
CRC0n
Setting
Square-wave output operation
7
0
7
0
2. For how to enable the INTTM00n interrupt, see CHAPTER 19 INTERRUPT FUNCTIONS.
6
0
6
0
Figure 7-34. Control Register Settings in Square-Wave Output Mode (1/2)
5
0
5
0
CHAPTER 7 16-BIT TIMER/EVENT COUNTERS 00 AND 01
4
0
4
0
(a) 16-bit timer mode control register 0n (TMC0n)
(b) Capture/compare control register 0n (CRC0n)
TMC0n3
1
3
0
TMC0n2
CRC0n2
0/1
1
User’s Manual U15947EJ3V1UD
TMC0n1
CRC0n1
0/1
0
CRC0n0
OVF0n
0
0
Clears and starts on match between TM0n and CR00n.
CR00n used as compare register
191

Related parts for upd78f0148m1gka1-9eu