fb2t-000z IDEC Corporation, fb2t-000z Datasheet - Page 5

• Manufacturer Part Number: fb2t-000z
• Description: Fb Series Plastic Control Boxes
• Manufacturer: IDEC Corporation

(06/07/04)
• • • • 140/200mm Type (FB2/FB3)
Control Unit Mounting Hole Centers
Mounting Hole Dimensions
Note: For contact cover boxes, see page 4.
Internal Dimensions
Applicable Accessories
Cover Mounting Screws
Type
Type
Shape
HW Series
Control Units
XW Series
Emergency
Stop Switches
Series
FB1
45
76
FB1
2 mounting
Nameplate:
Marking plate for nameplate: HWNP-∗
Anti-rotation ring:
EMO switch guard:
Switch guard:
Pushbutton clear boot: OC-31, OC-32
Padlock cover:
Nameplate:
EMO switch guard:
Anti-rotation ring:
holes
3.2
Control Unit
Mounting Area
Thickness
2-ø21.3 Knockout
mounting
centers
FB2
50mm
FB2
3 mounting
Cover
holes
13
59.5
Base
36/50mm
mounting
centers
FB3
Note: Choose a control box in consider-
D
HWAM, HWAQ, HWAS, HWAV-∗
HW9Z-RL
HW9Z-KG3, HW9Z-KG4
HW9Z-K1, HW9Z-K11
HW9Z-KL1
HWAV-∗
HW9Z-KG3, HW9Z-KG4
HW9Z-RL
3 mounting
Description
4-M4 Tapping Screw Holes for
Rear Mounting (Depth: 10mm)
holes
ation of control unit’s depth behind
the panel and the mounting cen-
ters of the adjacent control units.
2-Front Mounting Holes
FB1
45
L
A
B
C
30mm mounting centers
4 mounting
All dimensions in mm.
FB2
140
104
106
holes
84
All dimensions in mm.
FB3
FB2/FB3
FB2
31
62
92
2-ø14 Knockout
13
5 mounting
FB3
200
144
164
166
holes
FB3
150
Note: Confirm the specifications of control box, control units, and accessories
before choosing accessories, referring to separate catalogs.
Applicable DIN Rail
Note: Use DIN rail adapters FB9Z-PK3 when installing a DIN rail in the control box.
See pages 7 and 8.
Applicable Terminal Block / Transformer
Note: Install the terminal blocks and separate mounting transformers on a DIN rail
using two DIN rail adapters (FB9Z-PK3). Choose the types and quantity of terminal
blocks, transformers, mounting clips, and control boxes carefully taking the specifi-
cations into consideration. The separate mounting transformer can be installed on a
DIN rail adapter directly.
Installation
Panel Mounting
1. Installing the FB series from the front
• Using two M4 screws,
2. Installing the FB series from the rear
• Insert four M4 tapped screws into holes for tapping screws on the
3. Installation using mounting bracket FB9Z-PK1
• Refer to installation instructions on page 7.
Installing and Removing the Control Unit
• Refer to installation instructions for each control unit.
Installing the Safety Lever Lock for HW Series Control
Units (HW9Z-LS, yellow)
• When installing the HW series control units in the direction shown
FB
TW Series
Control Units
DIN Rail
Mounting Clip
Terminal Block
Separate Mounting
Transformer
the base onto the panel.
Recommended tightening
torque: 1.4 to 2.0 N·m
∗ Determine the screw length in
∗ Mounting screws are not supplied
back of the base (depth: 8 to 10 mm, tapping screw hole diameter:
ø3.7 mm), and fasten the screws to a tightening torque of 1.3±0.1
N·m (Nitto Seiko M4-P-TITE).
∗ Mounting screws are not supplied with the FB series. Use M4 tapping
∗ The value of the recommended tightening torque has been confirmed
below, install the safety lever lock with the lever in the unlocked
position, lock the lever, and push in the safety lever lock.
Instructions
consideration of the base and panel
thickness.
with the FB series. Use M4 mount-
ing screws.
screws (recommended screws: Nikko Seiko M4-P-TITE).
with a M4 tapping screw (Nitto Seiko M4-P-TITE). When using other
screws, check that the tapping screw hole is not damaged and the screw
can be securely tightened.
Description
Series
Nameplate:
Anti-rotation ring:
Metal protector:
Pushbutton clear boot: OC-31, OC-32
Button cover:
Padlock cover:
1
Plastic Control Boxes
BN-W Series: BN10W, BN15MW, BN15LW, BN30W
BA Series:
TWR5 ∗∗
Safety Lever Lock
install
Aluminum
Steel
Steel
Series / Type No.
BA111T, BA211T, BA311T
Material
NWA-∗, NWAQ-∗, NWAS-0,
NWAL-0, NWAQL-0, NWAV-∗
OGL-31
OLW-C
OCW-10∗, OCW-11∗
HW9Z-KL1, HS9Z-PC22
Mounting Screws
(M4)
2
3
Box Base
BAA1000
BAP1000
BNL6
Type No.
5.0 mm
(Base
Thickness)
Panel
5