mt45w1mw16pdga Micron Semiconductor Products, mt45w1mw16pdga Datasheet - Page 8

• Manufacturer Part Number: mt45w1mw16pdga
• Description: 16mb 1 Meg X 16 Async/page Cellularram 1.0 Memory
• Manufacturer: Micron Semiconductor Products

Part Numbering Information
Figure 3:
Valid Part Number Combinations
Device Marking
PDF: 09005aef81cadc83/Source:09005aef81c6edb4
16mb_asyncpage_cr1_0_p23z_2.fm - Rev. F 4/08 EN
Micron Technology
Product Family
45 = PSRAM/CellularRAM Memory
Operating Core Voltage
W = 1.7V–1.95V
Address Locations
M = Megabits
Operating Voltage
W = 1.7V–3.6V (see Note 1)
Bus Configuration
16 = x16
READ/WRITE Operation Mode
PD = Asynchronous/Page
Part Number Chart
Notes: 1. 3.6V I/O and –30°C exceed the CellularRAM Workgroup 1.0 specifications.
Micron CellularRAM devices are available in several different configurations and densi-
ties (see Figure 3).
After building the part number from the part numbering chart, please go to the Micron
Part Marking Decoder Web site at
part number is offered and valid. If the device required is not on this list, please contact
the factory.
Due to the size of the package, the Micron standard part number is not printed on the
device. Instead, an abbreviated device mark comprised of a five-digit alphanumeric
code is used. The abbreviated device marks are cross-referenced to the Micron part
numbers at http://www.micron.com/partsearch. To view the location of the abbreviated
mark on the device, refer to customer service note, CSN-11, “Product Mark/Label,” at
http://www.micron.com/csn.
Package Codes
GA = VFBGA “Green” (6 x 8 grid, 0.75mm pitch, 6.0mm x 8.0mm x 1.0mm) 48-ball
MT 45 W 1M W 16 PD GA -70
16Mb: 1 Meg x 16 Async/Page CellularRAM 1.0 Memory
8
http://www.micron.com/partsearch
Micron Technology, Inc., reserves the right to change products or specifications without notice.
WT ES
Part Numbering Information
Production Status
Blank = Production
ES = Engineering Sample
MS = Mechanical Sample
Operating Temperature
WT = –30°C to +85°C (see Note 1)
IT = –40°C to +85°C (contact factory)
Standby Power Options
Blank = Standard
Access/Cycle Time
70 = 70ns
©2005 Micron Technology, Inc. All rights reserved.
to verify that the