at43usb355 ATMEL Corporation, at43usb355 Datasheet - Page 51

• Manufacturer Part Number: at43usb355
• Description: At43usb355 Full-speed Usb Microcontroller With Embedded Hub, Adc And Pwm
• Manufacturer: ATMEL Corporation

Watchdog Timer
2603G–USB–04/06
(CS12..CS10 = 001 or 000), the PWM output goes active when the counter reaches the TOP
value, but the down-counting compare match is not interpreted to be reached before the next
time the counter reaches the TOP value, making a one-period PWM pulse.
Table 17. PWM Outputs OCR1X = $0000 or Top
Note:
In PWM mode, the Timer Overflow Flag1, TOV1, is set when the counter advances from
$0000. Timer Overflow Interrupt1 operates exactly as in normal Timer/Counter mode, i.e. it is
executed when TOV1 is set provided that Timer Overflow Interrupt1 and global interrupts are
enabled. This also applies to the Timer Output Compare1 flags and interrupts.
The Watchdog Timer is clocked from a 1 MHz clock derived from the 6 MHz on chip oscillator.
By controlling the Watchdog Timer prescaler, the Watchdog reset interval can be adjusted,
see Table 18 for a detailed description. The WDR (Watchdog Reset) instruction resets the
Watchdog Timer. Eight different clock cycle periods can be selected to determine the reset
period. If the reset period expires without another Watchdog reset, the AT43USB355 resets
and executes from the reset vector.
To prevent unintentional disabling of the watchdog, a special turn-off sequence must be fol-
lowed when the watchdog is disabled. Refer to the description of the Watchdog Timer Control
Register for details.
Figure 17. Watchdog Timer
COM1X1
1
1
1
1
X = A or B
Watchdog
1 MHz Clock
Reset
COM1X0
0
0
1
1
WDP0
WDP1
WDP2
WDE
OCR1X
$0000
$0000
TOP
TOP
Watchdog Prescaler
MCU Reset
Output OC1X
AT43USB355
H
H
L
L
51