mpc89x51a Megawin Technology, mpc89x51a Datasheet - Page 27

• Manufacturer Part Number: mpc89x51a
• Description: 8-bit Micro-controller
• Manufacturer: Megawin Technology

In other words, not all data reception will respond to RI, while specific data does.
By setting the SADDR and the SADEN, the user can filter out those data bytes that doesn’t like
to care. This feature brings great help to reduce software overhead.
The above feature adapts to the serial port when operated in Mode1, Mode2, and Mode3.
Dealing with Mode 0, the user can ignore it.
Frame Error Detection
A missing bits in stop bits will set the FE bits in the SCON register. The FE bits shares the
SCON bits 7 with SM0 and its actual function for SCON.7 is determined by SMOD0 (PCON.6).
If SMOD0 is set, SCON.7 functions as FE, otherwise functions as SM0. When used as FE bits,
it can only be cleared by software.
Reset
The RESET pin is used to reset this device. It is connected into the device to a Schmitt Trigger
buffer to get excellent noise immunity.
Any positive pulse from RESET pin must be kept at least two-machine cycle, or the device
cannot be reset.
Power Saving Mode and POF
There are two power saving modes which are selectable to drive the MPC89x51A to enter
power-saving mode.
1. IDLE mode
The user can set the bits PCON.0 to drive this chip entering IDLE mode.
In the IDLE mode, the internal clock is gated off to the CPU, but not to the interrupt, timer and
serial port functions.
There are two ways to terminate the idle. Activation of any enabled interrupt will cause
PCON.0 to be cleared by hardware to terminating the idle mode. The interrupt will be serviced
and following RETI, the next instruction to be executed will be performed right after the
instruction that causes the device entering the idle mode. Another way to wake-up from idle
is to pull RESET pin high to generate internal hardware reset.
MEGAWIN
MPC89x51A Data Sheet
27