lan9118 Standard Microsystems Corp., lan9118 Datasheet - Page 68

• Manufacturer Part Number: lan9118
• Description: Lan9118 High-performance Single-chip 10/100 Non-pci Ethernet Controller
• Manufacturer: Standard Microsystems Corp.

Revision 1.5 (07-11-08)
5.2.2
5.3
BASE ADDRESS
+ OFFSET
5Ch
6Ch
7Ch
8Ch
50h
54h
58h
60h
64h
68h
70h
74h
78h
80h
84h
88h
90h
94h
98h
TX FIFO Ports
The TX data Path consists of two FIFOs, the TX status and data. The TX Status FIFO can be read
from two locations. The TX Status FIFO Port will perform a destructive read, thus “Popping” the data
from the TX Status FIFO. There is also the TX Status FIFO PEEK location. This location allows a non-
destructive read of the top (oldest) location of the FIFO.
The TX data FIFO is Write Only. It is aliased in 8 DWORD locations (16 WORD locations in 16-bit
mode) from the 20h offset to 3Ch offset. The host may write to any of the 8(16) locations since they
all access the same TX data FIFO location and perform the same function.
Table 5.1, "LAN9118 Direct Address Register
the host bus.
System Control and Status Registers
WORD_SWAP
RX_FIFO_INF
TX_FIFO_INF
BYTE_TEST
RX_DP_CTL
RESERVED
RESERVED
PMT_CTRL
GPIO_CFG
GPT_CFG
GPT_CNT
IRQ_CFG
FIFO_INT
SYMBOL
HW_CFG
INT_STS
RX_CFG
TX_CFG
ID_REV
INT_EN
Table 5.1 LAN9118 Direct Address Register Map
CONTROL AND STATUS REGISTERS
DATASHEET
Chip ID and Revision.
Main Interrupt Configuration
Interrupt Status
Interrupt Enable Register
Reserved for future use
Read-only byte order testing register
FIFO Level Interrupts
Receive Configuration
Transmit Configuration
Hardware Configuration
RX Datapath Control
Receive FIFO Information
Transmit FIFO Information
Power Management Control
General Purpose IO Configuration
General Purpose Timer Configuration
General Purpose Timer Count
Reserved for future use
WORD SWAP Register
68
High Performance Single-Chip 10/100 Non-PCI Ethernet Controller
Map", lists the registers that are directly addressable by
REGISTER NAME
See “ID_REV—
Revision” on
Chip ID and
0000FFFFh
0000FFFFh
00000000h
00000000h
00000000h
87654321h
48000000h
00000000h
00000000h
00050000h
00000000h
00000000h
00001200h
00000000h
00000000h
00000000h
DEFAULT
SMSC LAN9118
page 69.
-
-
Datasheet