w83627sf Winbond Electronics Corp America, w83627sf Datasheet - Page 126

• Manufacturer Part Number: w83627sf
• Description: Winbond I/o
• Manufacturer: Winbond Electronics Corp America

13.8 Logical Device 7 (Game Port and MIDI Port and GPIO Port 1)
CR30 (Default 0x00)
CR60, CR 61 (Default 0x02, 0x01 if PNPCSV = 0 during POR, default 0x00 otherwise)
CR62, CR 63 (Default 0x03, 0x30 if PNPCSV = 0 during POR, default 0x00 otherwise)
CR70 (Default 0x09 if PNPCSV = 0 during POR, default 0x00 otherwise)
CRF0 (GP10-GP17 I/O selection register. Default 0xFF)
When set to a '1', respective GPIO port is programmed as an input port.
When set to a '0', respective GPIO port is programmed as an output port.
CRF1 (GP10-GP17 data register. Default 0x00)
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF2 (GP10-GP17 inversion register. Default 0x00)
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
These two registers select the Game Port base address [0x100:0xFFF] on 1 byte boundary.
These two registers select the MIDI Port base address [0x100:0xFFF] on 2 byte boundary.
Bit 7 - 3 : Reserved.
Bit 2
Bit 1
Bit 0
Bit 7 - 4 : Reserved.
Bit [3:0] : These bits select IRQ resource for MIDI Port .
= 1 Activate MIDI Port.
= 0 MIDI Port is disabled if bit 0 is also 0.
= 1 Activate Game Port.
= 0 Game Port is is disabled if bit 0 is also 0.
= 1 Activate both Game Port and MIDI Port.
= 0 Game Port is disabled is bit1 is also 0. MIDI Port is disabled if bit2 is also 0.
- 119 -
Publication Release Date: Nov. 2000
PRELIMINARY
W83627SF
Revision 0.60