w83627ehf Winbond Electronics Corp America, w83627ehf Datasheet - Page 68

• Manufacturer Part Number: w83627ehf
• Description: W83627ehf/ef W83627ehg/eg Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

Bit 7: A one restores power on default value to some registers. This bit clears itself since the power on
Bit 6: Reserved
Bit 5: Reserved
Bit 4: Reserved
Bit 3: A one disables the SMI# output without affecting the contents of Interrupt Status Registers. The
Bit 2: Reserved
Bit 1: A one enables the SMI# Interrupt output.
Bit 0: A one enables startup of monitoring operations, a zero puts the part in standby mode.
Note: The outputs of Interrupt pins will not be cleared if the user writes a zero to this location after an
6.8.33 Interrupt Status Register 1 - Index 41h (Bank 0)
Register Location:
Power on Default Value:
Attribute:
Size:
Bit 7: A one indicates the fan count limit of CPUFANIN0 has been exceeded.
Bit 6: A one indicates the fan count limit of SYSFANIN has been exceeded.
Bit 5: A one indicates a High limit of CPUTIN temperature has been exceeded.
Bit 4: A one indicates a High limit of SYSTIN temperature has been exceeded .
Bit 3: A one indicates a High or Low limit of 3VCC has been exceeded.
Bit 2: A one indicates a High or Low limit of AVCC has been exceeded.
Bit 1: A one indicates a High or Low limit of VIN0 has been exceeded.
Bit 0: A one indicates a High or Low limit of CPUVCORE has been exceeded.
6.8.34 Interrupt Status Register 2 - Index 42h (Bank 0)
Register Location:
Power on Default Value:
Attribute:
Size:
default is zero.
device will stop monitoring. It will resume upon clearing of this bit.
interrupt has occurred unlike "INT_Clear'' bit.
7
6
41h
00h
Read Only
8 bits
42h
00h
Read Only
8 bits
5
4
W83627EHF/EF, W83627EHG/EG
3
2
-62-
1
0
CPUVCORE
VIN0
AVCC(Pin114)
3VCC
SYSTIN
CPUTIN
SYSFANIN
CPUFANIN0