w83627ehf Winbond Electronics Corp America, w83627ehf Datasheet - Page 71

• Manufacturer Part Number: w83627ehf
• Description: W83627ehf/ef W83627ehg/eg Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

Bit 7-6: CPUFANIN0 Divisor bit1:0.
Bit 5-4: SYSFANIN Divisor bit1:0.
Bit 3: CPUFANIN1 output value if bit 0 sets to 0. Write 1, pin119(CPUFANIN1) always generates a
Bit 2: CPUFANIN1 Input Control. Set to 1, pin119 (CPUFANIN1) acts as FAN tachometer input, which
Bit 1: AUXFANIN1 output value if bit 0 sets to 0. Write 1, pin58(AUXFANIN1) always generates a logic
Bit 0: AUXFANIN1 Input Control. Set to 1, pin58 (AUXFANIN1) acts as FAN tachometer input, which is
Note : Please refer to Bank0 Index 5Dh , Fan divisor table.
6.8.40 Serial Bus Address Register - Index 48h (Bank 0)
Register Location:
Power on Default Value:
Attribute:
Size:
Bit 7: Reserved (Read Only).
Bit 6-0: Serial Bus address <7:1>.
6.8.41 Reserved - Index 49h (Bank 0)
6.8.42 CPUFANOUT1 with Temperature source Select - Index 4Ah (Bank 0)
Register Location:
Power on Default Value:
Attribute:
Size:
logic high signal. Write 0, pin119 always generates a logic low signal. This bit is default 0.
is default value. Set to 0, this pin119 acts as FAN control signal and the output value of FAN
control is set by this register bit 1.
high signal. Write 0, pin58 always generates a logic low signal. This bit is default 0.
default value. Set to 0, this pin58 acts as FAN control signal and the output value of FAN
control is set by this register bit 1.
7
6
48h
2Dh
Read/Write
8 bits
4Ah
64h
Read/Write
8 bits
5
4
3
W83627EHF/EF, W83627EHG/EG
2
1
-65-
0
Reserved
Publication Release Date: January 18, 2006
Serial Bus Addr.
Revision 1.0