ata5551 ATMEL Corporation, ata5551 Datasheet - Page 2

• Manufacturer Part Number: ata5551
• Description: Standard Read/write Id Transponder With Anti-collision
• Manufacturer: ATMEL Corporation

2. General
3. Transponder Antenna
4. Read/Write IDIC e5551
2
Atmel ATA5551 Preliminary
Figure 1-1.
The transponder is the mobile part of the closed coupled identification system (see
whereas the reader (writer) is based on the Atmel
read/write transponder is based on the Atmel IDIC e5551.
The transponder is a plastic cube device consisting of the following parts:
The antenna consists of a coil and a capacitor for tuning the circuit to the nominal carrier
frequency of 125kHz. The coil has a ferrite core for improving the distance of read, write and
programming operations.
The read/write Atmel IDIC e5551 is part of the transponder Atmel ATA5551. The data are trans-
mitted bi-directionally between the base station and the transponder. The transponder receives
power via a single coil from the RF signal generated by the base station. The single coil is
connected to the chip and also serves as the IC’s bi-directional communication interface.
Data are transmitted by modulating the amplitude of the RF signal. Reading of register contents
occurs by damping the coil by an internal load. Writing into registers occurs by interrupting the
RF field in a specific way. The Atmel ATA5551 transponder operates at a nominal frequency of
125kHz. There are different bit rates and encoding schemes.
The on-chip 264-bit EEPROM (8 block, 33 bits each) can be read and written block wise from
the base station. The blocks can be protected against overwriting by using lock bits. One block is
reserved for setting the operation modes of the IC. Another block contains a password to
prevent unauthorized writing.
See Atmel e5551 datasheet for more detailed information of the IDIC.
• The transponder antenna, realized as a tuned LC circuit
• Read/write Atmel IDIC (e5551) with EEPROM
MARC4 series
microcontroller
Atmel U2270B
read/write IC
Reader
System Block Diagram
RF Field
Power
Data
®
Coil
(Atmel e5551 + coil + C in plastic package)
U2270B or on discrete solutions, and the
Atmel ATA5551 Transponder
Atmel
e5551
C
9211A–RFID–10/10
Figure
1-1),