S10201-04 HAMAMATSU [Hamamatsu Corporation], S10201-04 Datasheet - Page 11

• Manufacturer Part Number: S10201-04
• Description: Back-thinned TDI-CCD Operating the back-thinned CCD in TDI mode delivers high sensitivity.
• Manufacturer: HAMAMATSU [Hamamatsu Corporation]

HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Back-thinned TDI-CCD
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
The TDI camera C10000 series is useful in
a wide range of imaging applications that
require both high speed and high sensitiv-
ity, including in-line monitoring and inspec-
tion.
Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
Avoid directly placing these sensors on a work-desk, etc. that may carry an electrostatic charge.
Precaution for use (Electrostatic countermeasures)
Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to
Ground the tools used to handle these sensors, such as tweezers and soldering irons.
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
discharge.
S10200-02, S10201-04, S10202-08, S10202-16
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
*9: Frame readout mode is useful for easy focusing, but it is not suitable for
*10: Selectable by serial command.
*11: Internal TDI line rate can be set in 33 ns steps.
Pixel number
Device structure
Pixel size
Effective area
TDI transfer direction
Readout mode
TDI output channel
Anti-blooming
TDI pixel clock rate
TDI line rate
Full-well capacity (Typ.)
Readout noise (Typ.)
Dynamic range (Typ.)
A/D converter
Image processing
Lens mount
Interface
Camera output clock
Camera output channel
TDI line rate control
Analog enhancement gain
Power /
Power consumption
Camera control
TDI camera C10000 series
Specifications
measurement.
Please consult with our sales office for details.
Parameter
12.29 mm (H) × 1.536 mm (V) 24.58 mm (H) × 1.536 mm (V)
Real-time shading correction with internal DSP
1024 (H) × 128 (V)
TDI readout mode or Frame readout mode *
2 ports (512 × 2)
1 port (1024 × 1)
C10000-301
Internal setting by serial command *
C-mount
Lateral overflow drain (× 100)
Serial control in Camera link
12 µm (H) × 12 µm (V)
DC +12 V / 20 V · A
0.45 kHz to 50 kHz
Base configuration
Back-thinned type
130 electrons rms
100000 electrons
12-bit / 8-bit *
External trigger
0 dB to 14 dB
Bi direction
30 MHz
60 MHz
770 : 1
2048 (H) × 128 (V)
2 ports (1024 × 2)
4 ports (512 × 4)
10
C10000-401
F-mount
Cat. No. KMPD1098E02
Apr. 2007 DN
11
9
11