SCCC1A150C1B SAMWHA [SAMWHA ELECTRIC], SCCC1A150C1B Datasheet - Page 2

• Manufacturer Part Number: SCCC1A150C1B
• Description: Surface Mount Disc Capacitors
• Manufacturer: SAMWHA [SAMWHA ELECTRIC]

Electrical Performance
No.
136
1
2
3
4
5
6
(tan δ , Q)
Operating
Temperature
Range
Capacitance
Dissipation Factor
Insulation
resistance
Dielectric
Withstanding
Voltage
Capacitance
temperature
Characteristics
SAMWHA CAPACITOR Co., Ltd.
Item
More than 10000MΩ
No remarkable abnormality is recognized
-25℃ ~ 110℃
Within the specified range
Q ≥ 400+20C
(C : capacitance, pF)
SCC Type
Requirement
B.E : -25℃ ~ +85℃
F : +10℃ ~ +65℃
B,E : 2.5% Max.
F : 5.0% Max.
SCK, SCG, SSC, SSD Type
- Temperature : 20±2℃
- Frequency : 1±0.1MHz(SCC Type)
- Relative Humidity : 60~70%
- Measure voltage : 1±0.1Vrms
- Applied Voltage :
- Charge Time : 60±5sec
- Testing Voltage
Based on Items 2.2. 12 of EIA RS-198-C
For 1 to 5 sec.(Between terminals)
The discharge current, however was
50 mA or less
To be below 500V - Rating Voltage
Above 500V - 500V
W.V
R.V
Test Conditions
1±0.1KHz
(SCK,SCG,SSC,SSD Type)
R.V
3kV
×
1.75
R.V
4kV~
×
1.5
Temperature and Humity Test Characteristics
No.
1
2
3
High
Temperature
Test
Humidity
Resistance
Test
Temperature
Cycle
Test
Item
Appearance
Capacitance
Change
Dissipation
Factor
(tan δ , Q)
I.R
Appearance
Capacitance
Change
Dissipation
Factor
(tan δ , Q)
I.R
Appearance
Capacitance
Change
Dissipation
Factor
(tan δ , Q)
I.R
More than 2000MΩ
No. visible damage
More than 500MΩ
No. visible damage
Q ≥ 200
More than 1000MΩ
±5% or ±0.5 pF
Whichever is larger
from initial measurement
±5% or ±0.5 pF
Whichever is larger
from initial measurement
±5% or ±0.5 pF
Whichever is larger
from initial measurement
Q ≥ 200
Q ≥ 200
SCC Type
No. visible damage
Requirement
SCK, SCG, SSC, SSD Type
B,E : 5% Max.
F : 7.5% Max.
B,E : 5% Max.
F : 7.5% Max.
B,E : 5% Max.
F : 7.5% Max.
B : With ± 10%
E : With ± 20%
F : With ± 30%
B : With ± 10%
E : With ± 20%
F : With ± 30%
B : With ± 10%
E : With ± 20%
F : With ± 30%
Surface Mount Disc Capacitors
Surface Mount Disc Capacitors
- Temperature : 85±2℃
- Test voltage : 1.2 times of the rated voltage
- Operating time of test : 1000 +48,/ -0 hours
After testing, The capacitor shall be subjected
to the standard test condition for a period 4~24
hours and shall be measured. Charge and
discharge current shall be 50 mA or less.
※Standard test condition :
- Temperature : 40±2℃
- Relative Humidity : 90~95% R.H
- Operating time of test : 500 +24, -0 hours
After testing, The capacitor shall be subjected
to the standard test condition for a period 4~24
hours and shall be measured. Charge and
discharge current shall be 50 mA or less.
※Standard test condition :
- The capacitors shall be subjected to 5cycles
After testing, The capacitor shall be subjected
to the standard test condition for a period 4~24
hours and shall be measured. Charge and
discharge current shall be 50 mA or less.
※Standard test condition :
of the temperature cycle under Table.
-Temperature : 20±2℃
- Frequency : 1± 0.1MHz(SCC Type)
- Relative Humidity : 60 ~ 70%
- Measure voltage : 1± 0.1Vrms
-Temperature : 20±2℃
- Frequency : 1± 0.1MHz(SCC Type)
- Relative Humidity : 60 ~ 70%
- Measure voltage : 1± 0.1Vrms
Step.
-Temperature : 20±2℃
- Frequency : 1± 0.1MHz(SCC Type)
- Relative Humidity : 60 ~ 70%
- Measure voltage : 1± 0.1Vrms
1
2
3
4
Standard test condition
Standard test condition
Temperature(
Test Conditions
+85, +0/-3
-25, +0/-3
1± 0.1KHz
(SCK, SCG, SSC, SSD Type)
1± 0.1KHz
(SCK, SCG, SSC, SSD Type)
1± 0.1KHz
(SCK, SCG, SSC, SSD Type)
℃
)
Period(minutes)
10~15
10~15
30
30
137