LUPA-1300 CYPRESS [Cypress Semiconductor], LUPA-1300 Datasheet - Page 5

• Manufacturer Part Number: LUPA-1300
• Description: 1.3 M Pixel High Speed CMOS Image Sensor
• Manufacturer: CYPRESS [Cypress Semiconductor]

1 Preamble
1.1 Overview
This document describes the interfacing and the driving of the image sensor
LUPA1300, which is a 1280 by 1024 CMOS pixel array working at 450 frames/sec.
The sensor is an active pixel sensor with synchronous shutter. The pixel size is 14 *
14 µm and the sensor is designed to achieve a fame rate of 450 frames/sec at full
resolution. This high frame rate can be achieved by 16 parallel output amplifiers each
working at 40MHz pixel rate.
The readout speed can be boosted by means of windowed Region Of Interest (ROI)
readout. High dynamic range scenes can be captured using the double slope
functionality.
The sensor uses a 3-wire Serial-Parallel (SPI) interface. It is housed in a 145-pin
ceramic PGA package.
In the following sections the different modules of the image sensor are discussed
more into detail. This datasheet allows the user to develop a camera-system based on
the described timing and interfacing.
1.2 Main features
The main features of the image sensor are identified as:
Cypress Semiconductor Corporation
Contact [e-mail]
• SXGA resolution: 1280 x 1024 active pixels.
• 14
• Pixel rate of 40 MHz using 16 parallel outputs.
• Random programmable windowing.
• Dual slope integration possible
• 145-pin PGA package
• Peak QE x FF of 15%.
• Optical format: 1,43” (17.9 mm x 14.3 mm)
• Optical dynamic range: 62 dB (1330:1) in single slope operation and 80…100
• 16 parallel analog output amplifiers.
• Synchronous pipelined shutter.
• Processing is done in a CMOS 0.50 µm triple metal process.
LUPA-1300
Datasheet
technology of FillFactory (US patent No. 6,225,670 and others)).
dB in double slope operation.
µ
m
2
square pixels (based on the high-fill factor active pixel sensor
Document # : 38-05711 Rev.**( Revision 3.1)
3901 North First Street
San Jose, CA 95134
Page 5 of 48
408-943-2600