BD6086GU_11 ROHM [Rohm], BD6086GU_11 Datasheet - Page 64

• Manufacturer Part Number: BD6086GU_11
• Description: 13LEDs ALC* Flash and Illumination
• Manufacturer: ROHM [Rohm]

© 2011 ROHM Co., Ltd. All rights reserved.
www.rohm.com
BD6086GU
7. RGB waveform setting examples
G*LED
G*LED
G*LED
R*LED
R*LED
R*LED
B*LED
B*LED
B*LED
Selecting a waveform pattern 8 causes a continuous normal
operation to take place through the setting current 1.
[Example 1] Normal operation
[Example 2] Blinking
[Example 3] Slope operation
Setting a rising/falling slope time to “0” causes
blinking to take place. Phase switching takes place
via the setting currents of R and G.
When a rising/falling slope time is longer than the
setting made in example 2, a continuous color
change is made by slope operation.
RGB*EN=1
RGB*EN=1
RGB*EN=1
RGB*EN=0
RGB*EN= ０
Waveform cycle
Waveform cycle
Waveform cycle
RGB*EN=0
64/80
[Example 6] 7-color change slope operation
[Example 5] Continuous lighting of four LEDs
G*LED
G*LED
G*LED
R*LED
R*LED
B*LED
R*LED
B*LED
B*LED
Combining the settings of a waveform pattern 11 and a
waveform cycle 131ms causes blinking at a rate of 15.3Hz
(approx. 16Hz).
This example shows that lighting occurs continuously in
the order of white, red, red and red.
R, G and B waveform patterns are set in a way that
any of R, G and B changes constantly.
[Example 4] 16Hz operation
RGB*OS=1
RGB*EN=1
RGB*EN=1
Technical Note
2011.04 - Rev.A
RGB*EN= ０
RGB*EN=0
Waveform cycle
Waveform cycle
Waveform cycle