MC9RS08KA1 FREESCALE [Freescale Semiconductor, Inc], MC9RS08KA1 Datasheet - Page 80

• Manufacturer Part Number: MC9RS08KA1
• Description: RS08 Microcontrollers
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

Internal Clock Source (RS08ICSV1)
9.4
9.4.1
The states of the ICS are shown as a state diagram and are described in this section. The arrows indicate
the allowed movements between the states.
9.4.1.1
FLL engaged internal (FEI) is the default mode of operation out of any reset and is entered when CLKS is
written to 0.
In FLL engaged internal mode, the ICSOUT clock is derived from the FLL clock, which is controlled by
the internal reference clock. The FLL loop will lock the frequency to 512 times the filter frequency.
9.4.1.2
The FLL bypassed internal (FBI) mode is entered when CLKS is written to 1 and LP bit is a 0.
In FLL bypassed internal mode, the ICSOUT clock is derived from the internal reference clock. The FLL
clock is controlled by the internal reference clock, and the FLL loop will lock the FLL frequency to 512
times the filter frequency.
9.4.1.3
The FLL bypassed internal low power (FBILP) mode is entered when CLKS is written to 1 and LP = 1.
In FLL bypassed internal low power mode, the ICSOUT clock is derived from the internal reference clock
and the FLL is disabled.
80
Functional Description
1
2
was active before MCU entered stop, unless a reset occurs while in stop.
ICS enters its Stop state when MCU enters stop, FLL is always disabled. ICS returns to the state that
If IREFSTEN is set when MCU enters stop, the ICSIRCLK remains running.
Operational Modes
FLL Engaged Internal (FEI)
FLL Bypassed Internal (FBI)
FLL Bypassed Internal Low Power (FBILP)
FLL Engaged
Internal (FEI)
CLKS=0
MC9RS08KA2 Series Data Sheet, Rev. 4
Figure 9-7. Clock Switching Modes
FLL Bypassed
Internal (FBI)
CLKS=1
LP=0
Stop
1, 2
FLL Bypassed
Internal Low
Power(FBILP)
CLKS=1
LP=1
Freescale Semiconductor