PEB3086 Infineon Technologies, PEB3086 Datasheet - Page 73

• Manufacturer Part Number: PEB3086
• Description: ISDN Subscriber Access Controller
• Manufacturer: Infineon Technologies

– Leave for the state “F6 synchronized” after INFO 2 has been recognized on the S/T-
– Leave for the state “F7 activated” after INFO 4 has been recognized on the S/T-
– Leave for any unconditional state if any unconditional C/I command is received.
As can be seen from the transition criteria, combinations of multiple conditions are
possible as well. A “ * ” stands for a logical AND combination. And a “+” indicates a logical
OR combination.
The sections following the state diagram contain detailed information on all states and
signals used.
3.5.1
3.5.1.1
Figure 39
shows this for the unconditional transitions (Reset, Loop, Test Mode i).
Data Sheet
interface.
interface.
shows the state transition diagram of the ISAC-SX state machine.
State Machine TE and LT-T Mode
State Transition Diagram (TE, LT-T)
73
Description of Functional Blocks
PEB 3086
2003-01-30
ISAC-SX
Figure 40