UPB1510 NEC, UPB1510 Datasheet - Page 11

• Manufacturer Part Number: UPB1510
• Description: 3 GHz INPUT DIVIDE BY 4 PRESCALER IC FOR DBS TUNERS
• Manufacturer: NEC

NOTE CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired operation).
(3) Keep the wiring length of the ground pins as short as possible.
(4) Connect a bypass capacitor (e.g. 1 000 pF) to the V
RECOMMENDED SOLDERING CONDITIONS
conditions other than those recommended below, contact your NEC sales representative.
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Method
This product should be soldered under the following recommended conditions.
Note After opening the dry pack, keep it in a place below 25 °C and 65 % RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
Package peak temperature: 235 °C or below
Time: 30 seconds or less (at 210 °C)
Count: 3, Exposure limit
Package peak temperature: 215 °C or below
Time: 40 seconds or less (at 200 °C)
Count: 3, Exposure limit
Soldering bath temperature: 260 °C or below
Time: 10 seconds or less
Count: 1, Exposure limit
Pin temperature: 300 °C
Time: 3 seconds or less (per side of device)
Exposure limit
Note
: None
Soldering Conditions
Note
Note
Note
: None
: None
: None
CC
pin.
Recommended Condition Symbol
For soldering methods and
WS60-00-1
VP15-00-3
IR35-00-3
PB1510GV
–
11