ATXMEGA384A1-CU ATMEL [ATMEL Corporation], ATXMEGA384A1-CU Datasheet - Page 11

• Manufacturer Part Number: ATXMEGA384A1-CU
• Description: 8/16-bit XMEGA A1 Microcontroller
• Manufacturer: ATMEL [ATMEL Corporation]

7.4.1
7.4.2
7.4.3
8067D–AVR–08/08
I/O Memory
SRAM Data Memory
EEPROM Data Memory
All peripherals and modules are addressable through I/O memory locations in the data memory
space. All I/O memory locations can be accessed by the Load (LD/LDS/LDD) and Store
(ST/STS/STD) instructions, transferring data between the 32 general purpose registers in the
CPU and the I/O Memory.
The IN and OUT instructions can address I/O memory locations in the range 0x00 - 0x3F
directly.
I/O registers within the address range 0x00 - 0x1F are directly bit-accessible using the SBI and
CBI instructions. The value of single bits can be checked by using the SBIS and SBIC instruc-
tions on these registers.
The I/O memory address for all peripherals and modules in XMEGA A1 is shown in the
eral Module Address Map” on page
The XMEGA A1 devices has internal SRAM memory for data storage.
The XMEGA A1 devices has internal EEPROM memory for non-volatile data storage. It is
addressable either in a separate data space or it can be memory mapped into the normal data
memory space. The EEPROM memory supports both byte and page access.
Byte Address
FFFFFF
10000
1FFF
9FFF
1000
2000
FFF
0
54.
External Memory
ATxmega384A1
Internal SRAM
I/O Registers
(0 to 16 MB)
EEPROM
(4KB)
(32K)
(4K)
Byte Address
FFFFFF
1FFF
5FFF
1000
2000
6000
FFF
0
XMEGA A1
External Memory
ATxmega256A1
Internal SRAM
I/O Registers
(0 to 16 MB)
EEPROM
(4KB)
(16K)
(4K)
“Periph-
11