ATXMEGA384A1-CU ATMEL [ATMEL Corporation], ATXMEGA384A1-CU Datasheet - Page 29

• Manufacturer Part Number: ATXMEGA384A1-CU
• Description: 8/16-bit XMEGA A1 Microcontroller
• Manufacturer: ATMEL [ATMEL Corporation]

14.4
14.5
14.6
8067D–AVR–08/08
Input sensing
Port Interrupt
Alternate Port Functions
•
•
•
•
Input sensing is synchronous or asynchronous depending on the enabled clock for the ports,
and the configuration is shown in
Figure 14-7. Input sensing system overview
When a pin is configured with inverted I/O the pin value is inverted before the input sensing.
Each ports have two interrupts with seperate priority and interrupt vector. All pins on the port can
be individually selected as source for each of the interrupts. The interrupts are then triggered
according to the input sense configuration for each pin configured as source for the interrupt.
In addition to the input/output functions on all port pins, most pins have alternate functions. This
means that other modules or peripherals connected to the port can use the port pins for their
functions, such as communication or pulse-width modulation.
page 48
what alternate functions that is available on a pin.
Sense both edges
Sense rising edges
Sense falling edges
Sense low level
INVERTED I/O
Pn
shows which modules on peripherals that enables alternate functions on a pin, and
Synchronizer
D Q
R
INn
D Q
Figure 14-7 on page
R
Asynchronous sensing
Synchronous sensing
DETECT
DETECT
EDGE
EDGE
29.
“Pinout and Pin Functions” on
XMEGA A1
Interrupt
Control
IREQ
Event
29