GLS85LP1008B-M-C-LFTE (rev. CB1) Greenliant, GLS85LP1008B-M-C-LFTE (rev. CB1) Datasheet - Page 22

• Manufacturer Part Number: GLS85LP1008B-M-C-LFTE (rev. CB1)
• Description: Flash 8G MLC, NAND MLC 3.3V Comm
• Manufacturer: Greenliant

Specifications of GLS85LP1008B-M-C-LFTE (rev. CB1)

• Product Category: Flash
• Rohs: yes

Advance Information
©2010 Greenliant Systems, Ltd.
Word 93: Hardware reset result
Bit
The contents of bits [12:0] of this word will change only during the execution of the hardware reset.
15
14
13
12-8
7-0
Word 128: Security Status
Bit
8
5
Function
Shall be cleared to zero
Shall be set to one
1: Device detected CBLID - above VIH
0: Device detected CBLIP - below VIL
Device 1 hardware reset result. Device 0 shall clear these bits to zero. Device 1
shall set these bits as follows:
12
11
10-9
8
Device 0 hardware reset result. Device 1 shall clear these bits to zero. Device 0 shall set
these bits as follows:
7
6
5
4
3
2-1
0
Function
Security Level
1: Security mode is enabled and the security level is maximum
0: and security mode is enabled, indicates that the security level is high
Enhanced security erase unit feature supported
1: Enhanced security erase unit feature set is supported
Reserved.
0: Device 1 did not assert PDIAG-.
1: Device 1 asserted PDIAG-.
These bits indicate how Device 1 determined the device number:
00: Reserved.
01: A jumper was used.
10: The CSEL signal was used.
11: Some other method was used or the method is unknown.
Shall be set to one.
Reserved.
0: Device 0 does not respond when Device 1 is selected.
1: Device 0 responds when Device 1 is selected.
0: Device 0 did not detect the assertion of DASP-.
1: Device 0 detected the assertion of DASP-.
0: Device 0 did not detect the assertion of PDIAG-.
1: Device 0 detected the assertion of PDIAG-.
0: Device 0 failed diagnostics.
1: Device 0 passed diagnostics.
These bits indicate how Device 0 determined the device number:
00: Reserved.
01: A jumper was used.
10: The CSEL signal was used.
11: Some other method was used or the method is unknown.
Shall be set to one.
22
8 GByte NANDrive
GLS85LP1008B
S71421-02-000
05/10