TDA8594SD/N1S,112 NXP Semiconductors, TDA8594SD/N1S,112 Datasheet - Page 21

• Manufacturer Part Number: TDA8594SD/N1S,112
• Description: Audio Amplifiers GEN PURP 75W 45dB
• Manufacturer: NXP Semiconductors

Specifications of TDA8594SD/N1S,112

• Rohs: yes
• Product: General Purpose Audio Amplifiers
• Output Type: Fixed
• Output Power: 75 W
• Maximum Power Dissipation: 80 W
• Mounting Style: SMD/SMT
• Package / Case: SOT-878-1
• Common Mode Rejection Ratio (min): 45 dB
• Factory Pack Quantity: 19

NXP Semiconductors
TDA8594
Product data sheet
Table 8.
Table 9.
Bit
D4
D3
D2
D1
D0
Bit
D7 and D6
D5
D4
D3
D2
D1
Instruction byte IB1
Instruction byte IB2
DC load detection enable
temperature information on DIAG pin
low pop (slow start) enable
soft mute channel 1 and channel 3 (mute delay 20 ms)
soft mute channel 2 and channel 4 (mute delay 20 ms)
Description
channel 4 clip information on DIAG or STB pin
channel 2 clip information on DIAG or STB pin
AC load detection enable
amplifier start enable
Description
clip detection level
load fault information (shorts, missing current) on DIAG pin
All information provided in this document is subject to legal disclaimers.
0 = clip information on DIAG pin
1 = clip information on STB pin
0 = clip information on DIAG pin
1 = clip information on STB pin
0 = AC load detection disabled
1 = AC load detection enabled; DBx[D4] bits not available for DC load detection
0 = DC load detection disabled
1 = DC load detection enabled
0 = amplifier not enabled, DIAG pin will remain LOW
1 = amplifier will start up, power-on occurred (DB2[D7] will be reset) and DIAG
pin will be released
00 = clip detection level 2 %
01 = clip detection level 5 %
10 = clip detection level 10 %
11 = clip detection level disabled
0 = temperature information on DIAG pin
1 = no temperature information on DIAG pin
0 = fault information on DIAG pin
1 = no fault information on DIAG pin
0 = low pop enabled
1 = low pop disabled
0 = no mute
1 = mute
0 = no mute
1 = mute
Rev. 4 — 26 February 2013
…continued
I
2
C-bus controlled 4  50 W power amplifier
TDA8594
© NXP B.V. 2013. All rights reserved.
21 of 49