EL5120TIWTZ-T7 Intersil, EL5120TIWTZ-T7 Datasheet - Page 13

• Manufacturer Part Number: EL5120TIWTZ-T7
• Description: Operational Amplifiers - Op Amps 12MHz Rail to Rail Op Amp IC
• Manufacturer: Intersil

Specifications of EL5120TIWTZ-T7

• Rohs: yes
• Number Of Channels: 1
• Common Mode Rejection Ratio (min): 75 dB
• Input Offset Voltage: 5 mV
• Input Bias Current (max): 50 nA
• Operating Supply Voltage: 4.5 V to 19 V
• Mounting Style: SMD/SMT
• Package / Case: TSOT-5
• Slew Rate: 12 V/us
• Shutdown: No
• Output Current: 200 mA
• Maximum Operating Temperature: + 85 C
• Gain Bandwidth Product: 8 MHz
• Supply Current: 750 uA

Power Supply Bypassing and Printed Circuit
Board Layout
The EL5120T can provide gain at high frequency, so good printed
circuit board layout is necessary for optimum performance.
Ground plane construction is highly recommended, trace lengths
should be as short as possible and the power supply pins must
be well bypassed to reduce any risk of oscillation.
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to
complete list of Intersil product families.
For a complete listing of Applications, Related Documentation and Related Parts, please see the respective product information page.
Also, please check the product information page to ensure that you have the most updated datasheet:
To report errors or suggestions for this datasheet, please go to
FITs are available from our website at
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
September 27, 2012
DATE
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
FN6895.0
REVISION
13
For information regarding Intersil Corporation and its products, see
Initial release.
in the quality certifications found at
http://rel.intersil.com/reports/search.php
For additional products, see
EL5120T
www.intersil.com/askourstaff
www.intersil.com/product_tree
www.intersil.com/design/quality
For normal single supply operation (the V
ground) a 4.7µF capacitor should be placed from V
then a parallel 0.1µF capacitor should be connected as close to
the amplifier as possible. One 4.7µF capacitor may be used for
multiple devices. For dual supply operation the same capacitor
combination should be placed at each supply pin to ground.
CHANGE
www.intersil.com
www.intersil.com/products
EL5120T
S
- pin is connected to
September 27, 2012
S
+ to ground,
FN6895.0
for a