MCIMX6D4AVT10AC Freescale Semiconductor, MCIMX6D4AVT10AC Datasheet - Page 122

• Manufacturer Part Number: MCIMX6D4AVT10AC
• Description: Processors - Application Specialized i.MX6D
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX6D4AVT10AC

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Operating Supply Voltage: 1.05 V to 1.5 V
• Memory Type: L1/L2 Cache, ROM, SRAM

Electrical Characteristics
4.11.16 Pulse Width Modulator (PWM) Timing Parameters
This section describes the electrical information of the PWM. The PWM can be programmed to select one
of three clock signals as its source frequency. The selected clock signal is passed through a prescaler before
being input to the counter. The output is available at the pulse-width modulator output (PWMO) external
pin.
Figure 89
4.11.17 SATA PHY Parameters
This section describes SATA PHY electrical specifications.
4.11.17.1 Transmitter and Receiver Characteristics
The SATA PHY meets or exceeds the electrical compliance requirements defined in the SATA
specifications.
The following subsections provide values obtained from a combination of simulations and silicon
characterization.
122
PWMn_OUT
depicts the timing of the PWM, and
P1
P2
ID
—
The tables in the following sections indicate any exceptions to the SATA
specification or aspects of the SATA PHY that exceed the standard, as well
as provide information about parameters not defined in the standard.
PWM Module Clock Frequency
PWM output pulse width high
PWM output pulse width low
i.MX 6Dual/6Quad Automotive and Infotainment Applications Processors, Rev. 2
Parameter
Table 81. PWM Output Timing Parameters
Figure 89. PWM Timing
Table 81
NOTE
lists the PWM timing parameters.
Min
15
15
0
ipg_clk
Max
—
—
Freescale Semiconductor
MHz
Unit
ns
ns