MCIMX6D4AVT10AC Freescale Semiconductor, MCIMX6D4AVT10AC Datasheet - Page 165

• Manufacturer Part Number: MCIMX6D4AVT10AC
• Description: Processors - Application Specialized i.MX6D
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX6D4AVT10AC

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Operating Supply Voltage: 1.05 V to 1.5 V
• Memory Type: L1/L2 Cache, ROM, SRAM

7
Table 104
Freescale Semiconductor
Number
Rev. 2
Rev.
Revision History
04/2013 Substantive changes throughout this document are as follows:
Date
provides a revision history for this data sheet.
i.MX 6Dual/6Quad Automotive and Infotainment Applications Processors, Rev. 2
• Incorporated standardized signal names. This change is extensive throughout.
• Figures updated to align to standardized signal names.
• Aligned references to FCBGA to read FCPBGA throughout document.
• Updated references to eMMC standard to include 4.41
•
•
•
•
•
•
•
•
•
•
•
•
•
• Removed section, EIM Signal Cross Reference. Signal names are now aligned with reference manual.
•
•
•
• Added
•
Table 104. i.MX 6Dual/6Quad Data Sheet Document Revision History
Added reference to EB792, i.MX Signal Name Mapping.
Table 1
MCIMX6Q4AVT08AC, MCIMX6D4AVT10AC, and MCIMX6D4AVT08AC were updated to show GPU
instead of VPU as an option.
Table 2
Table 4
Table 6
input voltage minimum changed to 1.275V and VDD_ARM CAP minimum changed to 1.150V.
Table 6
Product Usage Lifetime Estimates Application Note, AN4724.
Table
Table 10
Table 23
Table 52
Half SCLK period-2.
Table 55
Table 63
Table 101
Table
Section 1.2, “Features
Section 4.2.1, “Power-Up
Section 4.3.2, “Regulators for Analog
Section 4.10, “General-Purpose Media Interface (GPMI)
9. Maximum Supply Currents: Added current for i.MX6Dual
101Clarification of ENET_REF_CLK naming.
Section 4.6.1, “XTALI and RTC_XTALI (Clock Inputs) DC
“Example Industrial Grade Orderable Part Numbers”: Part Numbers MCIMX6Q4AVT10AC,
Changed reference to Global Power Controller to read General Power Controller.
Added VDD_ARM23_IN to Core supply voltages.
“Operating Ranges ": Run Mode - LDO Enabled, VDD_ARM_IN/VDD_ARM23_IN, 792 MHz,
“Operating Ranges ": Added reference for information on product lifetime : i.MX 6Dual/6Quad
Updated parameter CS6 ECSPIx_SSx Lag Time (CS hold time) Min from Half SCLK period to
Stop Mode Current and Power Consumption: Added SNVS Only mode
GPIO I/O DC Parameters: Removed parameters Iskod and Isspp.
eMMC parameter SD8 value Min updated from 5.6 ns to 1.5 ns.
RGMII parameter TskewR units corrected.
Updated GPIO_1 Ball Name value to PU (100K).
added bulleted item regarding the SOC-level memory system.
Sequence” updated wording.
Modules” section updates.
Substantive Change(s)
Timing” figures replaced, tables revised.
Parameters”.
Revision History
165