BTS308 E3062A Infineon Technologies, BTS308 E3062A Datasheet - Page 14

• Manufacturer Part Number: BTS308 E3062A
• Description: IC SWITCH SMART HISIDE TO220AB-5
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS308 E3062A

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 270 mOhm
• Current - Output / Channel: 1.3A
• Current - Peak Output: 5A
• Voltage - Supply: 4.7 V ~ 34 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: TO-220-4 Full Pack (Bent and Staggered Leads)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS308 E3062A; BTS308E3062AINTR; BTS308E3062AT; SP000011227

Changed since 08.96
Date
Dec
96
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-
support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Semiconductor Group
Change
"suitable for PWM" deleted at Application
List (Page 1) due to the fact, that where
may occure problems with current limit.
Initial short circuit current limit I
"V
Option overview, Short circuit to GND
protection, "
BTS308, only valid for BTS410H2
ON
=3V" deleted
V
bb
> 8 V typ
" deletet for
L(SCp)
Page 14
2003-Oct-01
BTS 308