L6740L STMicroelectronics, L6740L Datasheet - Page 21
![IC HYBRID CONTROLLERS 48TQFP](/photos/27/13/271375/tqfp-48_sml.jpg)
L6740L
Manufacturer Part Number
L6740L
Description
IC HYBRID CONTROLLERS 48TQFP
Manufacturer
STMicroelectronics
Datasheet
1.L6740LTR.pdf
(44 pages)
Specifications of L6740L
Applications
Hybrid Controllers
Voltage - Supply
9 V ~ 15 V
Current - Supply
20mA
Operating Temperature
0°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
48-TQFP Exposed Pad, 48-eTQFP, 48-HTQFP, 48-VQFP
Number Of Outputs
2
Output Current
170 A
Input Voltage
13.2 V
Mounting Style
SMD/SMT
Maximum Operating Temperature
+ 125 C
Minimum Operating Temperature
0 C
Hybrid Controller
compatible with PVI and SVI CPUs
Dual Controller
2 to 4 scalable phases for CPU CORE, 1 phase for NB
Dual Over-current Protection
Average and per-phase
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Voltage - Input
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
L6740L
Manufacturer:
ST
Quantity:
20 000
Part Number:
L6740LTR
Manufacturer:
ST
Quantity:
20 000
L6740L
5.4.2
5.4.3
PWROK de-assertion
Anytime PWROK de-asserts while EN is asserted, the controller uses the previously stored
Pre-PWROK Metal VID and regulates all the planes to that level performing an On-the-Fly
transition to that level.
PWRGOOD is treated appropriately being de-asserted in case the Pre-PWROK Metal VID
voltage is out of the initial voltage specifications.
PSI_L and efficiency optimization at light-load
PSI_L is an active-low flag (i.e. low logic level when asserted) that can be set by the CPU to
allow the VR to enter power-saving mode to maximize the system efficiency when in light-
load conditions. The status of the flag is communicated to the controller through the SVI bus
and it is reported on the PSI_L pin (open-drain).
The controller monitors the PSI_L pin also to define the PSI Strategy, that is the action
performed by the controller when PSI_L is asserted. According to
different voltage divider on PSI_L, it is possible to configure the device to disable one or two
phases while PSI_L is asserted. The device can also be configured to take no action so
phase number will not change after PSI_L assertion.
In case the phase number is changed, the device will disable one or two phases starting
from the highest one (i.e. if working at 3 phases, phase 3 will be disabled in case of 1 phase
reduction; phase 2 and 3 in case of 2phase reduction). To disable Phases, the controller will
set HiZ on the related PWM and re-configure internal phase-shift to maintain the
interleaving. Furthermore, the internal current-sharing will be adjusted to consider the phase
number reduction. ENDRV will remain asserted.
When PSI_L is de-asserted, the device will return to the original configuration.
Start-up is performed with all the configured phases enabled. In case of on-the-fly VID
transitions, the device will maintain the phase configuration set before.
PSI strategy (i.e. the voltage across PSI_L) is read and stored when PWRGOOD is
asserted at the end of the Soft-Start phase.
The phase number management is affected by the external driver selected.
●
●
Since PSI_L can be used to enable some of the external drivers connected, the status of the
pin is the logic AND between the PSI_L Flag and the status of the ENDRV pin: if the
controller wants to disable the external drivers pulling low ENDRV (because of protections
or simply for start-up synchronization) also PSI_L will be tied low.
NB section is not impacted by PSI_L status change.
efficiency improvement that can be achieved by enabling the PSI management.
If the external driver features the EN function, PSI_L can be tied directly to the EN of
the drivers of the phases that will be disabled.
Furthermore, in case the desired strategy is to work in single phase when 4phases are
configured, PSI_L can be tied also to the EN of the driver connected to Phase2
(apparently, from 4phases the max reduction would be to 2phase min.) in order to
disable also this phase during low-power mode.
If the external driver manages HiZ through the PWM input, PSI_L will be connected
only to the external divider used to set the strategy. The system can be down-graded to
single-phase only if configured for three phases.
Hybrid CPU support and CPU_TYPE detection
Figure 8
shows an example of the
Table
10, by programming
21/44