HLMA-KH00-J0000 Avago Technologies US Inc., HLMA-KH00-J0000 Datasheet - Page 2

• Manufacturer Part Number: HLMA-KH00-J0000
• Description: LED 3MM ALINGAP HI PERF RED/ORN
• Manufacturer: Avago Technologies US Inc.
• Type: Uni-Colorr

Specifications of HLMA-KH00-J0000

• Viewing Angle: 45°
• Package / Case: Radial - 2 Lead
• Color: Orange-Red
• Millicandela Rating: 200mcd
• Current - Test: 20mA
• Wavelength - Dominant: 615nm
• Wavelength - Peak: 621nm
• Voltage - Forward (vf) Typ: 1.9V
• Lens Type: Clear
• Lens Style/size: Round, 3mm, T-1
• Height: 4.70mm
• Mounting Type: Through Hole
• Resistance Tolerance: 615nm
• Led Size: T-1
• Illumination Color: Red-Orange
• Lens Color/style: Untinted Non-Diffused
• Operating Voltage: 1.9 V
• Wavelength: 615 nm
• Luminous Intensity: 200 mcd
• Mounting Style: Through Hole
• Package Type: T-1
• Emitting Color: Red Orange
• Test Current (it): 20mA
• Forward Current: 50mA
• Dominant Wave Length: 615nm
• Luminous Flux: 0.5lm
• Forward Voltage: 2.4V
• Product Length (mm): 3.43mm
• Product Height (mm): 4.7mm
• Product Depth (mm): 3.43mm
• Mounting: Through Hole
• Peak Wavelength: 621nm
• Shape Type: Circular
• Chip Material: AlGaInP
• Main Category: Standard LED
• Number Of Elements: 1
• Pin Count: 2
• Operating Temperature Classification: Industrial
• Operating Temp Range: -40C to 100C
• Reverse Voltage: 5V
• Lens Dimensions: 3.18x3.18x3.68mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 516-1892; HLMA-KH00-J0000

Package Dimensions
(0.050) NOM.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040")
Absolute Maximum Ratings at T
DC Forward Current
Peak Forward Current
Time Average Input Power
Transient Forward Current
Reverse Voltage (I
Operating Temperature Range
Storage Temperature
Junction Temperature
Wave Soldering Temperature [1.59 mm (0.063 in.) from Body]
Solder Dipping Temperature [1.59 mm (0.063 in.) from Body]
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance.
5. Operation at currents below 10 mA is not recommended, please contact your Avago sales representative.
2
1.27
DOWN THE LEADS, UNLESS OTHERWISE NOTED.
6.35 (0.250)
5.58 (0.220)
(0.95)
24.10
CATHODE
MIN.
R
[1,4,5]
= 100 A)
[2]
[3]
[2]
(10 s Pulse)
(0.100)
(0.040)
(0.018)
2.54
1.02
0.45
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
NOM.
NOM.
SQUARE
NOMINAL
4.70 (0.185)
4.19 (0.165)
A
= 25 C
50 mA
200 mA
103 mW
500 mA
5 V
-40 to 100 C
-40 to 100 C
110 C
250 C for 3 seconds
260 C for 5 seconds