ST7MDT10-TEB/DVP STMicroelectronics, ST7MDT10-TEB/DVP Datasheet - Page 10

• Manufacturer Part Number: ST7MDT10-TEB/DVP
• Description: KIT ADAPTERS ST7
• Manufacturer: STMicroelectronics

Specifications of ST7MDT10-TEB/DVP

• Accessory Type: Target Board
• For Use With/related Products: ST7MDT10-DVP3 Emulator
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connecting to your application board
3.1
10/31
DIP16 package
This procedure tells you how to connect the ST7MDT10-DVP3 emulator to your
application board when your target ST7 microcontroller is in a DIP16 package,
using the DIP16/SO16 device adapter.
1 Solder the DIP16 socket to your application board.
2 Ensure that the emulator and your application board are powered off.
3 Connect the 34-pin flat cable to the J1 connector on the ST7MDT10-DVP3
4 Plug the other end of the 34-pin flat cable into J1 on the DIP16/SO16 device
5 If the SO16 connector is plugged into the device adapter, remove it as shown in
TEB, making certain to align the orientation guides as shown in
J2 connector on your TEB is not used in this configuration.
adapter (ref.: DB587), as shown in
there is only one possible way to connect them.
the inset illustration in
Figure 4: Connecting the 34-pin flat cable to the TEB
Figure 5
. It is not used in this configuration.
Connector labels (J1 and J2)
Figure 5
34-pin flat cable
Orientation guides
. Because of the orientation guides
ST7MDT10-DVP3 Probe User Guide
MDT10-DVP3 TEB
Figure 4
. The