ST7MDT10-TEB/DVP STMicroelectronics, ST7MDT10-TEB/DVP Datasheet - Page 18

• Manufacturer Part Number: ST7MDT10-TEB/DVP
• Description: KIT ADAPTERS ST7
• Manufacturer: STMicroelectronics

Specifications of ST7MDT10-TEB/DVP

• Accessory Type: Target Board
• For Use With/related Products: ST7MDT10-DVP3 Emulator
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connecting to your application board
3.5
18/31
SDIP32 package
This procedure tells you how to connect the ST7MDT10-DVP3 emulator to your
application board when your target ST7 microcontroller is in an SDIP32 package.
1 Solder the SDIP32 socket to your application board.
2 Ensure that the emulator and your application board are powered off.
3 Connect the 34-pin flat cable to the J1 connector on the ST7MDT10-DVP3
4 Plug the other end of the 34-pin flat cable into J1 on the SDIP32 adapter
5 Insert the pins of the SDIP32 adapter into the socket soldered on your
Refer to your ST7-DVP3 Emulator User Manual for information about connecting
your emulator to your PC.
TEB, making certain to align the orientation guides as shown in
connect the 26-pin flat cable to the J2 connector, in the same manner.
(ref.: DB585), as shown in
on the SDIP32 adapter.
application board, as shown in
SDIP32 adapter and on your application board to ensure that its pin number 1
is aligned with pin 1 on your application board.
SDIP32 adapter
Figure 9: SDIP32 connection to application board
Figure 9
Figure 3
. Likewise, plug the 26-pin flat cable into J2
Application board
. Use the orientation indicators on the
ST7MDT10-DVP3 Probe User Guide
Orientation indicators
Figure 4
. Then