CDB3310 Cirrus Logic Inc, CDB3310 Datasheet - Page 15

• Manufacturer Part Number: CDB3310
• Description: BOARD EVAL FOR CS3310 COL CTRL
• Manufacturer: Cirrus Logic Inc

Specifications of CDB3310

• Main Purpose: Audio, Volume Control
• Embedded: No
• Utilized Ic / Part: CS3310
• Primary Attributes: Stereo Volume Control, 0.5 dB Step Size, Serial Control
• Secondary Attributes: -95.5 dB Attenuation, +31.5 dB Gain, 0.001% THD+N, 116 dB Dynamic Range
• Product: Audio Modules
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1000

ZCEN - Zero Crossing Enable, Pin 1.
PARAMETER DEFINITIONS
Dynamic Range
Total Harmonic Distortion plus Noise
Interchannel Isolation
DS82F1
This pin enables or disables the zero crossing detection and time-out function used
during analog output level transitions. A high level on this pin enables the zero
crossing detection function. A low level on this pin disables the zero crossing
detection.
Full scale (RMS) signal to broadband noise ratio. The broadband noise is measured
over the specified bandwidth with the input grounded. Units in decibels.
The ratio of the rms value of the signal to the rms sum of all other spectral
components over the specified bandwidth (typically 10 Hz to 20 kHz), including
distortion components. Expressed in decibels.
A measure of crosstalk between the left and right channels. Measured for each
channel at the converter’s output with the input under test grounded and a full-scale
signal applied to the other channel. Units in decibels.
CS3310
15