MCP2150DM Microchip Technology, MCP2150DM Datasheet - Page 13

• Manufacturer Part Number: MCP2150DM
• Description: BOARD DEMO FOR MCP2150
• Manufacturer: Microchip Technology

Specifications of MCP2150DM

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150
• Primary Attributes: IrDA Controller with PIC18F MCU
• Secondary Attributes: USB Interface
• Processor To Be Evaluated: MCP2150, MCP2155
• Processor Series: MCP215x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

© 2009 Microchip Technology Inc.
The MCP2150 Developer’s Board, as shown in Figure 1-1, has the following hardware
features:
1. Mini USB connector (for powering the board).
2. On Board +3.3V regulator for powering PIC18F65J50.
3. Hooks for an external regulated DC supply.
4. Jumper to Isolate PIC18F65J50 power signal from rest of board power. This
5. DB-9 connector and associated hardware for direct connection to MCP2150
6. Fourteen-pin header connection to Host UART interface.
7. Fourteen 1x3 pin jumpers for routing of the UART signals between the
8. MCP2150 BAUD1:BAUD0 state jumpers.
9. Green power-on indicator LED.
10. Implemented IR transceiver circuit (two optional optical transceiver circuits
11. Reset switch for PIC18F65J50 device.
12. ICSP Header for PIC18F65J50.
13. Jumper option for PIC18F65J50 program selection.
14. PIC18F65J50 crystal.
15. MCP2150 crystal socket.
16. Carrier Detect (CD) indicator LED.
17. MCP2150 SOIC and DIP Footprints (SOIC package is default installation. To
Note:
allows the board to operate at voltages higher than 3.3V.
UART (DB-9 interface requires RS-232 signal levels).
MCP2150, PIC18F65J50, and MAX3238 devices.
implemented but not populated).
install the DIP package requires the removal of the SOIC package).
A schematic of the MCP2150 Developer’s Board is shown in
Section A.2 “Board - Schematic - Page 1”
Product Overview
DS51869A-page 13