MCP2150DM Microchip Technology, MCP2150DM Datasheet - Page 53

• Manufacturer Part Number: MCP2150DM
• Description: BOARD DEMO FOR MCP2150
• Manufacturer: Microchip Technology

Specifications of MCP2150DM

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150
• Primary Attributes: IrDA Controller with PIC18F MCU
• Secondary Attributes: USB Interface
• Processor To Be Evaluated: MCP2150, MCP2155
• Processor Series: MCP215x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

© 2009 Microchip Technology Inc.
3. If the HyperTerminal program window does not indicate that the window is
4. In the program menu, select File>Properties. The window in Figure D-3 is shown.
FIGURE D-3:
5. In the New Connection Properties window, on the Connect To tab, go to the
“Disconnected”, select Call>Disconnect. In the lower-left corner, the
HyperTerminal program window will indicate “Disconnected”.
“Connect Using” pull-down and select the desired COM port. For the Primary
Device, this will be the virtual serial port created by the IrCOMM2K driver
installation (such as COM7). For the connection to the Embedded System, this
will be one of the standard COM ports (such as COM1, COM2, or COM3).
Configuring the HyperTerminal
NEW CONNECTION PROPERTIES WINDOW
®
Program
DS51869A-page 53