KIT34673EPEVBE Freescale Semiconductor, KIT34673EPEVBE Datasheet - Page 10

• Manufacturer Part Number: KIT34673EPEVBE
• Description: KIT EVALUATION FOR MC34673
• Manufacturer: Freescale Semiconductor
• Type: Battery Managementr

Specifications of KIT34673EPEVBE

• Main Purpose: Power Management, Battery Charger
• Embedded: No
• Utilized Ic / Part: MC34673
• Primary Attributes: 1 Cell- Li-Ion
• Secondary Attributes: LED Status Indicators
• Input Voltage: 2.6 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Product: Power Management Modules
• Supply Current: 1.2 A
• Silicon Manufacturer: Freescale
• Silicon Core Number: MC34673
• Kit Application Type: Power Management - Battery
• Application Sub Type: Battery Charger
• Kit Contents: Evaluation Board, CD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MC34673

Test Setup with the Evaluation Board
7.2
There are 10 connecting pads (J1 to J10 with corresponding names) on the evaluation board to
let the user simply connect the board to their system. The GND pads link power ground of the
MC34673. The INPUT pad connects an external DC power supply to the evaluation board. The
PPR, CHG, EN, FAST, and ISET pads link to the corresponding pins of the MC34673. The VL
pad is used for the user to supply a logic I/O voltage to the evaluation board, if that application
system needs a logic voltage level to interface to the PPR, CHG, and FAST pins of the MC34673.
The VBAT pad connects the positive pole of the Li+ battery being charged.
7.3
The KIT34673 evaluation board provides 7 signal test points and 3 ground test points for users
to conveniently hookup multi-meters and oscilloscope probes to evaluate the MC34673. The test
points connect the pins of the MC34673 with the same name directly.
8
The test setup is shown in
limit to the INPUT pad on the evaluation board. Connect the positive and negative polarities of
the Li+ battery to the VBAT pad and the GND pad on the evaluation board respectively. Use a
current meter and a voltage meter to measure the charge current and the voltage respectively.
Turn on the power supply and the evaluation board starts charging the battery.
10
Table 4. The Settings of the Pin Headers for an Embedded Charger Connecting to the System
Test Setup with the Evaluation Board
Connector Pads
Test points
Using the High Input Voltage Charger for Single Cell Li-Ion
Figure
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
JP9
Pin Header Jumpers
8. Connect a DC power source with a larger than 1.5A current
Shorted
Open
Open
Shorted
Shorted
Shorted
Shorted
Shorted
2 and 3 shorted
Default Setting
Batteries, Rev. 1.0
Freescale Semiconductor