MAX1403EVKIT Maxim Integrated Products, MAX1403EVKIT Datasheet - Page 2

• Manufacturer Part Number: MAX1403EVKIT
• Description: EVAL KIT FOR MAX1403
• Manufacturer: Maxim Integrated Products

Specifications of MAX1403EVKIT

• Number Of Adc's: 1
• Number Of Bits: 18
• Sampling Rate (per Second): 480
• Data Interface: Serial
• Inputs Per Adc: 6 Single Ended
• Input Range: ±VREF/gain
• Power (typ) @ Conditions: 16.9mW @ 480SPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: 0°C ~ 70°C
• Utilized Ic / Part: MAX1403
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MAX1403 EV System
2
MAX1403.EXE
MAX1403.HLP
KIT1403.L11
MAX1403.INI
MAX1403.CPP
MAX1403.H
KIT1403.ASM
EVKIT.ASM
INSTALL.EXE
UNINST.INI
UNMAXIM.EXE
_______________________________________________________________________________________
FILE
FILE
FILE
FILE
Windows Application Program Files
Install/Uninstall Program Files
Application program that runs under
Windows 95/98
Help file
Software loaded into 68HC11 microcon-
troller
Program settings file
Source code module for driving the
MAX1403, provided for reference. Includes
definitions of the register names and low-
level access routines. Compiled with
Borland C++ 4.52. Maxim holds the copy-
right but allows customers to adapt the pro-
gram for their own use without charge.
Header file for MAX1403.CPP, provided for
reference.
Main source code for the KIT1403.L11 pro-
gram, provided for reference. Maxim holds
the copyright but allows customers to
adapt the program for their own use without
charge.
Source code defining the program inter-
face with the Maxim 68HC11 Module ROM
(Rev. 1.1).
Installs the EV kit files on your computer.
Database for uninstall program.
Removes the EV kit files from your comput-
er. This file is automatically copied to
C:\WINDOWS during installation.
Example Source Code Files
MAX1403 EV Kit Files
68HC16 Source Code Files
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Obtain the following equipment before you begin:
• A DC power supply that generates +5VDC to +12VDC
• An IBM PC-compatible computer running Windows
• A spare serial communications port, preferably a 9-
• A serial cable to connect the computer’s serial port
1) Before you begin, make sure your 68HC11 module
2) Carefully connect the boards by aligning the 40-pin
3) Connect the DC power source to the µC module at
4) Connect a cable from the computer’s serial port to
5) Install the software on your computer by running the
6) Start the MAX1403 program by opening its icon in
7) The program will prompt you to connect the µC
_________________________Quick Start
at 30mA to 50mA
95/98
pin plug
to the Maxim 68HC11 Module
has the Rev. 1.1 ROM. The software will not function
with the Rev. 1.0 ROM.
header of the MAX1403 EV kit with the 40-pin con-
nector of the 68HC11 module. Gently press them
together. The two boards should be flush against
one another.
terminal block J2, located next to the ON/OFF
switch, along the top edge of the µC module.
Observe the polarity marked on the board.
the µC module. If using a 9-pin serial port, use a
straight-through, 9-pin female-to-male cable. If the
only available serial port uses a 25-pin connector, a
standard 25-pin to 9-pin adapter will be required.
The EV kit software checks the modem status lines
(CTS, DSR, DCD) to confirm that the correct port
has been selected.
INSTALL.EXE program from the floppy disk. The
program files are copied and icons are created for
them in the Windows 95/98 Start Menu. The EV kit
software evaluates both the MAX1403 and the
MAX1401.
the Start Menu.
module and turn its power on. Slide SW1 to the “ON”
position. Select the correct serial port, and click OK.
The program will automatically download the file
KIT1403.L11 to the module.
Recommended Equipment