ATTINY20-EK1 Atmel, ATTINY20-EK1 Datasheet - Page 154

• Manufacturer Part Number: ATTINY20-EK1
• Description: KIT EVAL TOUCH ATTINY20
• Manufacturer: Atmel

Specifications of ATTINY20-EK1

• Sensor Type: *
• Sensing Range: *
• Interface: *
• Sensitivity: *
• Voltage - Supply: *
• Embedded: *
• Utilized Ic / Part: *
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Core Sub-architecture: TinyAVR
• Kit Contents: Board
• Svhc: No SVHC (15-Dec-2010)
• Mcu Supported Families: ATtiny20
• Tool / Board Applications: Microcontroller
• Rohs Compliant: Yes
• Tool Type: Development Kit
• Cpu Core: AVR 8
• Data Bus Width: 8 bit
• Processor To Be Evaluated: ATtiny20
• Interface Type: Touch
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18.3.4
18.3.5
18.3.6
154
ATtiny20
Parity Bit Calculation
Supported Characters
Operation
Figure 18-3. Serial frame format.
Symbols used in
The parity bit is always calculated using even parity. The value of the bit is calculated by doing
an exclusive-or of all the data bits, as follows:
where:
The BREAK character is equal to a 12 bit long low level. It can be extended beyond a bit-length
of 12.
The IDLE character is equal to a 12 bit long high level. It can be extended beyond a bit-length of
12.
Figure 18-4. Supported characters.
The TPI physical layer operates synchronously on the TPICLK provided by the external pro-
grammer. The dependency between the clock edges and data sampling or data change is
shown in
TPICLK
TPIDATA
TPIDATA
TPIDATA
TPIDATA
ST:
D0-D7: Data bits (least significant bit sent first)
P:
SP1:
SP2:
P = D0
P:
D0-D7:
Figure
IDLE
IDLE
IDLE
⊗
IDLE
Start bit (always low)
Parity bit (using even parity)
Stop bit 1 (always high)
Stop bit 2 (always high)
D1
18-5. Data is changed at falling edges and sampled at rising edges.
Figure
⊗
ST
ST
Parity bit using even parity
Data bits of the character
D2
18-3:
⊗
D3
D0
D0
⊗
D4
D1
D1
⊗
D5
DATA CHARACTER
BREAK CHARACTER
IDLE CHARACTER
⊗
D6
⊗
D7
D7
⊗
D7
0
P
P
SP1
SP1
SP2
SP2
8235B–AVR–04/11
IDLE/ST
IDLE/ST
IDLE/ST
IDLE/ST