DEMO9S08LC60 Freescale Semiconductor, DEMO9S08LC60 Datasheet - Page 17

• Manufacturer Part Number: DEMO9S08LC60
• Description: BOARD DEMO FOR 9S08LC60
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08LC60

• Contents: Evaluation Board
• Processor To Be Evaluated: MC9S08LC60
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08LC
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08LC60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5 Operating Modes
5.1 Overview
The Demonstration Board can work in two modes: “standalone” mode and “host” mode.
5.2 Standalone Mode
In standalone mode, no PC connection is required. The microcontroller is factory programmed
with a sample application which shows the value of the potentiometer on the display.
To run the built-in example:
1.
2.
3.
4.
5.
6.
7.
8.
9.
5.3 Host Mode
In host mode the program execution is controlled by the host PC through the “USB” connector.
You can use the PC to debug the application by, for example, executing the program step by
step and watching how the microcontroller registers vary, using the provided CodeWarrior
Development Studio.
Ensure that both the “CLK ENA” jumpers are inserted.
Ensure that all of the “IO1” and “IO2” jumpers are inserted.
Ensure that all of the “LED ENA” jumpers are inserted.
Ensure that both the “g-Sel1” and “g-Sel2” jumpers select the “0” position.
Ensure that the “Sleep Mode# SEL” jumper selects the “1” position.
Ensure that the “POWER SEL” jumper selects the “USB” position.
Power on the board via a USB cable. Alternatively, you can power the Demonstration
Board through a 12 V DC plug-in power supply (not included in the kit). In this case, the
“POWER SEL” jumper must select the “UNREG” position.
The green “POWER” LED on the board should turn on.
Rotate the potentiometer. Its value will be shown on the display.
DEMO9S08LC60 User's Manual
Page 15