HS38000EPI61H Renesas Electronics America, HS38000EPI61H Datasheet - Page 246

• Manufacturer Part Number: HS38000EPI61H
• Description: DEV EMULATOR BASE UNIT H8/38000
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS38000EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: 38000 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 test program.
D.1
To execute the test program, use the following hardware; do not connect the user system interface cable, user
system, or expansion I/O board.
• E6000 emulator (select one of the followings according to the PC interface specifications)
• Host computer
• The E6000 PC interface board (select either from the followings according to the PC interface
Note: The PC interface board is not necessary when the USB interface is used for HS38000EPI61H.
1. Install the E6000 PC interface board in the host computer and connect the supplied PC interface cable to the
2. Connect the PC interface cable to the emulator.
3. Connect the supplied AC adapter to the emulator.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the emulator power switch.
HS3800EPI60H
HS388REPI60H
HS3880EPI60H
HS38000EPI61H + HS3800EBK61H
HS38000EPI61H + HS388REBK61H
specifications):
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
LAN adapter (HS6000ELN01H)
board.
System Set-Up for Test Program Execution
Appendix D Diagnostic Test Procedure
225