HS2633REPI61H-U Renesas Electronics America, HS2633REPI61H-U Datasheet - Page 229

• Manufacturer Part Number: HS2633REPI61H-U
• Description: EMULATOR BASE UNIT H8S/2633R FAM
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2633REPI61H-U

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2633R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 test program.
D.1
To execute the test program, use the following hardware; do not connect the user system interface cable and user
system.
• E6000 emulator (HS2633REPI61H or HS2633EPI61H)
• Host computer
• The E6000 PC interface board (Select one interface board or card from the following depending on the PC
1. Install the E6000 PC interface board in the host computer and connect the supplied PC interface cable to the
2. Connect the PC interface cable to the emulator.
3. Connect the supplied AC adapter to the emulator.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the emulator power switch.
interface specifications.):
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
USB adapter (HS6000EIU01H or HS6000EIU02H)
LAN adapter (HS6000ELN01H)
board.
System Set-Up for Test Program Execution
Appendix D Diagnostic Test Procedure
209