PG-FPL Renesas Electronics America, PG-FPL Datasheet - Page 20

• Manufacturer Part Number: PG-FPL
• Description: PROGRAMMER FLASH MEM 78K0 V850
• Manufacturer: Renesas Electronics America

Specifications of PG-FPL

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3B. (When the FPL is connected with the target system without using the FPL-FA)
Caution:
Caution:
Caution:
20
• Method of connecting the tip of the target cable with the FPL-FA
<1> Disconnect the FPL-FA from the target cable.
<2> Check that the power to the target system is not turned on.
<3> Connect the tip of the target cable marked "0.GND" to GND of the target system.
<4> Check that the power to the target system is not turned on.
<5> Connect the tip of the target cable marked "1.VDD" to VDD of the target system.
<6> Connect the tip of the target cable marked "2.VDD2" to VDD2 of the target system.
<7> Connect the tips of other target cables to the target system.
<8> Turn on the power to the target system.
Make a connection so that the stamp mark (number) on the tip of the target cable matches
the number on the FPL-FA board.
(When MODE2, MODE3, or MODE4 is set, power is supplied from the FPL, so that this step
is not required.)
Check that the power to the target system is not turned on before connecting the tar-
get cable. If the target cable is connected after the power to the target system is
turned on, this product can be damaged.
Be sure to connect "0.GND" at the beginning.
If connections are made in an incorrect order, this product and target system can be
damaged.
Be sure to make connections in the order from "0.GND" to "1.VDD" to "2.VDD2" to
"other signals".
If connections are made in an incorrect order, this product and target system can be
damaged.
Figure 2-5: Connecting the Target Cable with the FPL-FA
Preliminary User’s Manual U17271EE1V0UM00
Chapter 2 Hardware Installation
Tip of target cable
Match the number