PG-FPL Renesas Electronics America, PG-FPL Datasheet - Page 67

• Manufacturer Part Number: PG-FPL
• Description: PROGRAMMER FLASH MEM 78K0 V850
• Manufacturer: Renesas Electronics America

Specifications of PG-FPL

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

This chapter explains a series of basic operations of the PG-FPL with the GUI software, taking a case
where the µPD70F3266 is used as the target device as an example. This chapter covers how to start
the system, execute the EPV command, and program the target device.
For the other commands and applications, refer to Chapter 4 Using The GUI Software.
Series of operations described in this chapter
The conditions of the series of operations described in this chapter are as follows:
(1)
(2)
(3)
Target system
Target device
Clock
Voltage level
Communication
FPL
Parameter file
Clock setting
Port
MODE switch
Operation mode
Write HEX
Option setting
Installing the GUI software
Install the FPL GUI software in the host machine you are using, by referring to
Chapter 3 Software Installation (if the software has not been installed yet).
Installing the driver
Install the USB driver in the host machine you are using, by referring to
Chapter 3 Software Installation (if the driver has not been installed yet).
Installing the parameter file
Copy the parameter file for the µPD70F3266 to the hard disk and install it in
<FPL-install-path>\PRM.
Download the parameter file from the following:
http://www.ee.nec.de/update
Preliminary User’s Manual U17271EE1V0UM00
:
:
:
:
:
:
:
:
:
:
:
µPD70F3266
5 MHz
3.3 V
UART CH0
70F3266_CSI0.PRM
5 MHz Multiplied by 4
COM2 (38400 bps)
2 (V
Chip
FPL_TEST.HEX
• Read verify after Program
• Blank check before Erase
DD
Chapter 5 Example of Use
: 3.3, V
DD2
: N.C)
67