DM300004-1 Microchip Technology, DM300004-1 Datasheet - Page 76

• Manufacturer Part Number: DM300004-1
• Description: BOARD DEMO DSPICDEM.NET 1
• Manufacturer: Microchip Technology
• Series: dsPIC™r
• Type: Microcontrollerr

Specifications of DM300004-1

• Contents: *
• Mcu Supported Families: DsPIC30F
• Supported Devices: DsPIC30F6014
• For Use With: PIC30F5013
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: FCC/JATE PSTN, Ethernet NIC
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: DM300004-1R; DM300004-1R

PICDEM.net™ 1 and dsPICDEM.net 2 Connectivity Dev Board User’s Guide
6.3
DS51471A-page 72
DEMONSTRATION CONFIGURATIONS
Some possible applications implied by this demonstration include:
• POS Terminals
• Set Top Boxes
• Drop Boxes
• Fire Panels
• Internet-enabled home security systems
• Internet-connected power, gas and water meters
• Internet-connected vending machines
• Smart Appliances
• Industrial Monitoring
The soft modem demonstration is set up to run either as a pair of dsPIC30F devices
running the soft modem and connected end-to-end, or as a dsPIC30F device
communicating with a remote terminal equipped with a standard reference modem.
The LEDs and switches on the dsPICDEM.net board are not used for the soft modem
demonstration.
6.3.1
The soft modem demonstration requires the following equipment:
• dsPICDEM.net Development Board for originate/answer modem
• dsPICDEM.net Development Board or standard reference modem for
• PC or laptop for configuring and controlling dsPIC30F soft modem(s) via AT
• PC or laptop for configuring and controlling standard reference modem via AT
• Analog phone line for each originate and answer modem
• RJ-11 phone cable for each dsPICDEM.net board and standard reference modem
6.3.2
Figure 6-1 illustrates the set-up configuration for operating the end-to-end soft modem
demonstration. This configuration requires the modem software on both
dsPICDEM.net boards. The soft modem is controlled by AT commands entered on the
Windows HyperTerminal (or suitable alternative terminal emulator) running on the PC
or Laptop. This demonstration requires two analog phone lines, one each for the
originate and answer modems.
answer/originate modem
commands
commands
(not provided)
Note: Connect dsPICDEM.net to an analog line only. Using a non-analog line
Equipment Requirements
Selecting the Demonstration Configuration
(e.g., digital, PBX Multi line) may damage the modem.
 2004 Microchip Technology Inc.