101-0506 Rabbit Semiconductor, 101-0506 Datasheet - Page 107

• Manufacturer Part Number: 101-0506
• Description: CARD CPU SR9160 128K SRAM SMRTST
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0506

• Accessory Type: Smart Star CPU Card
• For Use With/related Products: SR9160
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

9.5.3 Smart Star D/A Converter Card Function Calls
RETURN VALUE
See Also
RETURN VALUE
SEE ALSO
PARAMETERS
RETURN VALUE
SEE ALSO
User’s Manual
void anaOutDisable(void);
void anaOutEnable(void);
int anaOutEERd(int channel);
Turns off (disables) voltage regulator for output-channel op-amps on all D/A Converter Cards, leaving
all output channels in a high-impedance state.
None.
Turns on (enables) voltage regulator for output-channel op-amps on all D/A Converter Cards.
None.
The D/A Converter Card calibration constants, gain, and offset are stored in the factory in the upper half
of the EEPROM on the D/A Converter Card. Use this function to read the D/A Converter Card calibra-
tion constants into the global table _dacCalib
channel is the D/A converter output channel. channel should be passed as
where slotnumber is 0–6, and channelnumber is 0–7
or
where slotnumber is 0–6, and channelnumber is 0–7.
0 if successful.
–1—control command unacceptable.
–2—EEPROM address unacceptable.
anaOutEnable, anaOut, anaOutVolts, anaOutmAmps
anaOutDisable, anaOut, anaOutVolts, anaOutmAmps
channel = (slotnumber * 128) + (channelnumber)
channel = ChanAddr(slotnumber, channelnumber)
anaOutEEWr
NOTE: The voltage regulator on/off is disabled (off) at power-up or reset. All output
channels must be configured to the required voltage or current outputs before calling
the
the maximum output.
anaOutEnable
function since unconfigured channels will be set automatically to
107