101-0506 Rabbit Semiconductor, 101-0506 Datasheet - Page 56

• Manufacturer Part Number: 101-0506
• Description: CARD CPU SR9160 128K SRAM SMRTST
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0506

• Accessory Type: Smart Star CPU Card
• For Use With/related Products: SR9160
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.2.5 LCD/Keypad Sample Programs Showing TCP/IP Features
The following sample programs, found in the TCPIP subdirectory in
SAMPLES/LCD_Keypad/122x32_1x7
pad module connected to the backplane. Remember to configure the IP address, netmask,
and gateway as indicated in the sample programs.
• MBOXDEMO.C —This program implements a web server that allows Web e-mail mes-
• TCP_RESPOND.C —This program and TCP_SEND.C are executed on two separate sin-
• TCPSEND.C —This program and TCP_RESPOND.C are executed on two separate sin-
When using TCPSEND.C and TCP_RESPOND.C , connect the CPU Card and the other
single-board computer to an Ethernet. If you connect the them directly, be sure to use a
crossover Ethernet cable; straight-through Ethernet cables and a hub may be used instead.
56
sages to be entered that are then shown on the LCD display. The keypad allows you to
scroll within messages, flip to other e-mails, mark messages as read, and delete e-mails.
When a new e-mail arrives, an LED turns on, and turns off once the message has been
marked as read. A log of all e-mail actions is kept, and can be displayed in the Web
browser. All current e-mails can also be read with the Web browser.
When using MBOXDEMO.C , connect the Smart Star CPU Card and a PC (or other device
with a Web Browser) to an Ethernet. If you connect the PC and the CPU Card directly,
be sure to use a crossover Ethernet cable; straight-through Ethernet cables and a hub
may be used instead.
gle-board computers to demonstrate how the two boards communicate with each other.
Use PCSEND.EXE on the PC console side at the command prompt if you do not have a
second board. PCSEND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows
TCP_RESPOND.C
sage received is displayed on the LCD, and you may respond by pressing a key on the
keypad. The response is then sent to the remote single-board computer.
gle-board computers to demonstrate how the two boards communicate with each other.
Use PCRESPOND.EXE on the PC console side at the command prompt if you do not
have a second board. PCRESPOND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows
When a key on the keypad is pressed, a message associated with that key is sent to a
specified destination address and port. The destination then responds to that message.
The response is displayed on the LCD.
Note that only the
LEFT
waits for a message from another single-board computer. The mes-
and
UP
scroll keys are set up to cause a message to be sent.
directory.
directory.
, are demonstrate the features of the LCD/key-
Smart Star (SR9000)